IndustryConstruction

Shut-off waterproofing of the foundation

Waterproofing of foundation and wall interfaces with Abris materials

Sealing of expansion joints of buildings and structures with Abris materials

Sealing consists of filling with a sealing mastic and a cord or applying a tape at the mouth of the joint formed by joining adjacent prefabricated elements.

Foundation waterproofing

Abris Ru (polymer-bitumen) is non-hardening liquid drying mastic on the base of white spirit. It is applied with a spatula or brush on a dry and clean surface. It is used as a coating waterproofing. When the solvent evaporates, the penetration is reduced to 30 units.

Protection of structural joints against moisture

We offer waterproofing material Abris WS, designed for use in concrete work to protect structural and working joints from penetration of pressure moisture and hydrostatic pressure during the construction and repair of underground concrete and other building structures, places of passage of utilities, channels and tunnels.

Waterproofing of working joints with pressure moisture

The main task in construction is reliable waterproofing, both structures (pools, reservoirs, etc.) and the building itself.

Sealing of roof and its elements with Abris materials

The proposed roof sealing technologies  and a wide range of self-adhesive sealing tapes, cords and mastics Abris make it possible to effectively use sealants when constructing various types of roofing, with various roofing materials, as well as during repair work on an operating roof.

Radon protection

We offer technology of protection against radon with Abris sealants.

Sealing technology for installation of PVC, aluminium, wood window units

The use of this complex system for the installation of windows, with a slight increase in the cost of these works, will greatly increase the service life of the foam and the thermal insulation indicators of the entire structure as a whole.

Sealing of seams of monolithic concrete structures

The material (Abris S-DB 200x2000) is a strip of galvanized iron with a special coating applied to both sides.

Technology of sealing joints and wall units with Abris materials

Areas of use:

• walls made of single and three-layer reinforced concrete panels;
• walls made of metal three-layer panels;
• walls from frame panels.

The technology of sealing of interpanel joints with Abris materials

The technology is intended for sealing the joint of 3-layer reinforced concrete panels operating under conditions of potash salt production.

Sealing of frame and hangar-type structures

Application of Abris sealing materials for frame and hangar structures.

Sealant for installation of underfloor heating

Our development of Abris S-LTpvh is a unique material that will help you easily and reliably mount warm floors in your house.

Sealing of sandwich panels with Abris S materials

Sandwich panels as structural systems are one of the latest and widely used building materials.

Acoustic membrane. Soundproof material Abris

Acoustic membrane Abris  Szv is designed for sound insulation of elements of building structures (ceilings, floors, frame plasterboard structures of partitions, etc.) in combination with sound-absorbing porous materials in residential and office buildings, private houses, hotels, educational institutions, recording and filming studios, sports centers, etc.

Pipeline protection

Sealing of polymer membranes by cold vulcanization

installation of a soft roof based on polymer membranes, waterproofing of reinforced concrete and metal prefabricated building structures, etc. with the help of a cold vulcanization sealant Abris S.

Arrangement of the junction of the roof to the parapet

This technology describes how, with the help of Abris Fillet, it is possible to ensure a tight fit of the roofing roll material to all surfaces.

Sealing technology for translucent structures

The modern building materials market is replete with imported and domestic materials of both curing and non-curing types.  ZGM specialists recommend using non-curing materials of the Abris series for translucent structures.  What are the advantages, you ask?