01.03.2022

Sealing of roof and its elements with Abris materials

The proposed roof sealing technologies and a wide range of self-adhesive sealing tapes, cords and mastics Abris make it possible to effectively use sealants when constructing various types of roofing, with various roofing materials, as well as during repair work on an operating roof.

For high-quality installation of the roof, mastics, sealants, fasteners, etc. are needed. Sealing during roofing protects the roofing system from moisture, improves the temperature and humidity indicators of the building structure, increases the service life of threaded connections and abutments, and extends the service life of the structure.
Roof sealants must be resistant to a complex of influencing factors and have the following properties: moisture-gas-vapor tightness, weather resistance, resistance to UV radiation, alternating temperatures, aggressive environments, frost resistance, durability, environmental safety, good adhesion to materials of the roofing structure, anti-corrosion properties, manufacturability. These requirements are met by non-curable sealants Abris.

Places of application of Abris materials for sealing various types of roofs:

Roll (bitumen-polymer)

preparatory waterproofing treatment of the coating surface;
fastening canvases overlap and butt;
edge and internal waterproofing.

Sheet roof

wave crest seal;
seal in folds or protection from the outside during repairs;
gasket for threaded connection;

waterproofing of the longitudinal outer seam.


Sealing of joints during roofing installation Tape Abris S-LB	Sealing of roof joints during repair Tape Abris S-LTf.gofr

Sealing a single standing seam Adjacent roofing pictures; Sealant Abris S-LB	Sealing of double standing folding Adjacent roofing pictures; Sealant Abris S-LB (cord Abris S-cord, briquette Abris S-B)

Mastic roof

cold application with reinforcing pads made of rolled synthetic and acrylic fiberglass fabrics;
processing of hard-to-reach surfaces.

Set roof

surface treatment of fasteners, slices;
skate bars and joints of tent-shaped roofs.

Under-roof roll materials

connection at vertical and horizontal overlapping;
connection to vertical and horizontal surfaces;
connection to projecting parts and adjacent construction structures.

Sealing of roofing joints

adjoining the roof to the parapet;
drain funnel on flat roof;
treatment of junctions of troughs and gutters;
places of clearance between through outlet elements and roof sheets;
places of attachment of overlay elements;

places of adjoining to construction structures.

Roof valley sealing

Tape Abris S-LTf.gofr

Sealing the joints of the roof to the chimney

Tape Abris S-LTf.gofr

Materials used:

Polymer-bitumen mastic Abris Ru-sh in cartridges

Section: tubes (cartridges)
Packaging: cartridge
TU: 5572-003-43008408-99
High-quality single-component polymer-bitumen mastic Abris Ru-sh, is a homogeneous paste-like mass of black color packed in cartridges. It can also be produced in metal sealed buckets. Mastic has a good self-adhesive ability to any dry, cleaned surfaces and high anticorrosive properties. It is characterized by high physical stability in case of temperature changes and other adverse weather factors.