25.02.2022

Soundproofing Abris VBD for cars

Scope of materials Abris VBD for sound insulation of cars.

Abris VBD-1

Self-adhesive material that does not require heating during installation, easily glues to any uneven surfaces, vertical, horizontal, negative, inclined. Operating temperature is from -60 to + 180 °С. Vibration damping coefficient 0.12 standard units.

Designed to reduce vibrations transmitted from the engine and transmission units to the vehicle body. It is an anti-corrosion protection. Installed on floor parts, front and rear parts of the body, doors, engine compartment bulkhead, wheel arches, roof.

Abris VBD-2

Multilayer self-adhesive material that does not require heating during installation, it is easily glued to any uneven surfaces, vertical, horizontal, negative, inclined. Operating temperature is from -60 to + 180 °С. Vibration damping coefficient 0.26 standard units.

Abris VBD-1T

Bituminous-polymer material designed to reduce vibrations in automotive equipment, operating temperature is from -40 to + 100 °C. When installed, it requires heating up to 50 °C. Mechanical loss coefficient is 01 - 0.19 standard units (with a thickness of 2-4 mm.) Available in rolls or sheets 200 mm wide, with or without an adhesive layer. Fits on the floor, wheel arches, boot roofs.

Abris VBD-1Tf

Bituminous-polymer foil material designed to reduce vibrations in automotive equipment, operating temperature range is from -40 to + 100 °C. When installed, heating up to 50 °C is required. Mechanical loss coefficient is 0.16-0.22 standard units (with a thickness of 2-4 mm). It is produced in rolls or sheets 200 mm wide, with or without an adhesive layer. Fits on doors, engine compartment, wheel arches.