RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Vibration and sound insulation of cars
A long drive in a car with a high level of noise leads to rapid fatigue of the driver and reduces traffic safety.
Unfortunately, many parts of cars experience vibration and are additional sources of noise. The problem of noise reduction is solved not only structurally, but also due to the use of vibration and sound absorbing materials.
The effect of the use of noise, heat and insulation kits:
reduction of engine noise, transmission, suspension;
elimination of squeaks of plastic interior parts;
improvement of interior acoustics;
interior insulation.
 |
 |
Vibration and noise insulation system Abris is a complex of materials, consisting of:
- vibration damping blocks of the Abris VBD brand;
- soundproof materials Abris LTiz, Abris LTfiz;
- sound-absorbing materials Abris LTvl, Abris LTvlf;
- anti-creak materials Abris LTnp.
The complex of materials Abris is intended for the finalization of a serial car in order to reduce internal and external noise in the car, audio preparation, i.e. improving the sound quality of car acoustics, as well as anti-corrosion protection. Abris VBD material has been serially produced since 2002 and supplied to the largest automobile plants: OJSC GAZ, OJSC KAMAZ, OJSC PAZ, OJSC MAZ, JV CJSC MAZ-MAN, etc.
The use of vibration and sound absorbing materials Abris increases the comfort of your car.
Materials used:
Vibration damping unit Abris VBD-3
Section: Parts
Packaging: corrugated cardboard boxes
TU: 2513-003-52471462-2001
Self-adhesive material in the form of a tape or part, duplicated with foil and coated with anti-adhesive material.
Vibration damping unit Abris VBD-1Tfk
Section: Parts
Packaging: corrugated cardboard boxes
TU: 2513-003-52471462-2001
Fused thermoplastic self-adhesive material in the form of a part or tape with an adhesive layer, a reinforcing foil coating and an anti-adhesive coating.
Vibration damping unit Abris VBD-1Tf
Section: Parts
Packaging: corrugated cardboard boxes
TU: 2513-003-52471462-2001
Welded thermoplastic material in the form of a tape or a strip without an adhesive layer.
Vibration damping unit Abris VBD-1T
Section: Parts
Packaging: corrugated cardboard boxes
TU: 2513-003-52471462-2001
Welded thermoplastic material in the form of a part or a strip without an adhesive layer.
Sealing tape Abris-LB
Section: Tapes
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99
The sealant is in the form of a self-adhesive tape, which is covered with an anti-adhesive material on both sides.
Sealing tape Abris S-LTnp
Section: Tapes
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99
The sealant is in the form of a self-adhesive tape, which is covered with an anti-adhesive material on the one hand, with a non-woven fabric on the other.
Sealing tape Abris S-LTfiz
Section: Tapes
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99
The sealant is in the form of a self-adhesive tape, which on the one hand is covered with an anti-adhesive material, on the other is reinforced with foiled foamed polyethylene (folgoizolon).
Sealant Abris-Sh
Section: Cords
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99
Cord coated with anti-adhesive material.
Vibration damping unit Abris VBD-2
Packaging: corrugated cardboard boxes
TU: 2513-003-52471462-2001
Self-adhesive vibration damping material in the form of tape or part duplicated with foil and coated with anti-adhesion material.
Vibration damping unit Abris VBD-1
Packaging: corrugated cardboard boxes
TU: 2513-003-52471462-2001
self-adhesive vibration damping material in the form of tape or part, duplicated with foil and coated with anti-adhesion material.
Ask your question
All fields marked with an asterisk (*) are required