RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Liquid radiation protection (mastic Abris RZ)
Mastic Abris RZ is a plastic-elastic polymer composite material with a special filling. Mastic is intended for radiation protection against ionizing radiation in problem areas (joints, engineering communications, cable entries, etc.). It is applied with a spatula or manually by pressing the material into hard-to-reach places.
Advantages
- the ability to change the thickness of the protective coating depending on the value of the lead equivalent;
- the manufacturability of the protection of complex surfaces due to the plastic-elastic and self-adhesive properties of the material;
- wide operating temperature range;
- chemical resistance to aggressive environments, including seawater; anti-corrosion protection;
- gas and steam tightness;
- reduced installation time, reduced cost of work;
- the possibility of making mastic according to the customer's requirements.
Technical specifications
|
Indicator name |
Abris RZ |
|
Equivalent thickness of mastic RZ 01 Abris (barytic filler, at a tension on a x-ray tube of 100 kV) = 1 mm of Pb |
9 |
|
Penetration at 0.1 mm |
200-280 |
|
Strength of bond with concrete at separation, MPa, not less than |
0,1 |
|
Strength of bond with metal during peeling, N/m, not less than |
400 |
|
Water release,%, max. |
0,2 |
|
Mushroom resistance, score, maximum (GOST 9.049-91) |
2 |
|
Density, g/cm³, minimum |
2,0 |
|
Vapor permeability, mg/ppm Pa |
2*10-5 |
|
Resistance to weak solutions of acids, concentrated alkalis, sea water |
resistant |
Mastic Abris RZ
1. Output communications.
2. Slotted holes and cracks.
3. Deformation seam.
Materials used:
Industrial Barite Panel Abris
Section: Panels
TU: 23.99.19-021-52471462-2017
Abris barite panel for industrial use is a combined panel consisting of a radiation-protective part (barite-filled Abris material, lead plate), lined with galvanized steel. The thickness and design of the radiation protection part is formed depending on the required lead equivalent.
Radiation-protective material Abris RZsk-01-LB
Section: Tapes
Packaging: corrugated cardboard boxes
TU: 6990-012-52471462-2009
Barite-filled material Abris Rsk-01-LB in the form of a self-adhesive tape, which is coated on both sides with an anti-adhesive material.
Ask your question
All fields marked with an asterisk (*) are required