Sealant Abris VS-Sh (bentonite cord)

Section: Cords
Packaging: corrugated cardboard boxes
TU: 5772-008-52471462-2007

Sealant in the form of a self-adhesive tourniquet of round or rectangular cross-section, which is covered with an anti-adhesive material.

Scope of application:

Waterproofing of seams and joints of underground structures (concrete, metal, etc.) exposed to hydrostatic water pressure;
Waterproofing of places of engineering communications: structural seam between the foundation plate and the wall; wall and ceiling; working seam in the foundation plate.

Color: Red.

Product form: cord.

Main technical characteristics:

Material	Sealant in the form of a self-adhesive tourniquet of round or rectangular cross-section, which is covered with an anti-adhesive material.
Basic geometric dimensions: Diameter, mm	5,0-40,0
Operating temperature	From -60 °С to +150 °С
Bond strength with concrete at separation, MPa, not less	0,10
swelling in water after 24 hours, %, not less than	200

Mode of application:

Before applying Abris VS, clean the concrete surface from dirt and ice. It is allowed to install the cord on a damp surface. Standing water must be removed from the surface before work is carried out;
Before installation, remove the anti-adhesive coating;
The cord should be installed on the concrete surface tightly, without gaps;
Cords are connected to each other end-to-end;
Perform "caulking" of the seam using asbestos-cement mortar or other composition for caulking joints, avoiding voids and air bubbles inside the seam.

Industry

Сonstruction.

Ask your question

All fields marked with an asterisk (*) are required