RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Material for protection against electromagnetic radiation Abris EMInk-DTf
Packaging: corrugated cardboard boxes
TU: 2290-014-52471462-2011
Material in the form of a part without adhesive layer, which on one side is coated with anti-adhesion material, on the other side is reinforced with aluminium foil.
Scope of application:
EMI material is intended for protection of technical means, buildings, premises, personnel in various industries and services against harmful effects of electromagnetic fields of radio frequency range.
Characteristics:
Color: from gray to black.
Product release form: parts.
Main technical characteristics:
| Material | The material in the form of a part without an adhesive layer, which on one side is covered with an anti-adhesion material, on the other, is reinforced with aluminum foil. |
| The main geometric dimensions are: Width (mm) × Thickness (mm) |
(1÷-100)×(0,5÷5,0) |
| Operating temperature | from -60 °С to +160 °С |
| Flexibility, (20±5)°C, radius of rounding of the beam 15mm | Absence of cracks and breaks |
| Shielding efficiency in the frequency range 30-3200 MHz with a material thickness of 2.0 mm, dB, not less | 50 |
| Storage conditions | Store in the original packaging in a dry room, avoiding direct sunlight. The shelf life is 12 months. |
Method of application:
It is recommended to perform operations with Abris EMInk material at air temperature not lower than minus 20 °С. Before application of Abris EMI material, clean the protected surface from rust, dirt, dust, apply water-resistant polymer cement compositions to defective places. The surface shall have no chips, shells, solution strains and other damages of depth or height greater than 2-3 mm.
When working with Abris EMIink-DTf part without adhesive layer, it is necessary to attach the part to the insulated surface mechanically using self-cutting screws and pressure strips in accordance with the working design. Attach the remaining parts end-to-end in the same way without clearances. Places of possible clearances are isolated using Abris EMIsk-LB, Abris EMIsk-LT tapes. The second and subsequent layers are applied in a similar manner, overlapping the joints of the parts.
Industry
Ask your question
All fields marked with an asterisk (*) are required