RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Material for protection against electromagnetic radiation Abris EMIsk-DT
Packaging: corrugated cardboard boxes
TU: 2290-014-52471462-2011
The material is in the form of a self-adhesive part, which on the one hand is covered with an anti-adhesive material, on the other is reinforced with aluminum foil.
Scope of application:
Abris EMI material is designed to provide protection of technical equipment, buildings, premises, personnel in various industries and services from the harmful effects of electromagnetic fields of the radio frequency range.
Characteristics:
Color: from gray to black.
Product release form: parts.
Main technical characteristics:
| Material | The material is in the form of a self-adhesive part, which on the one hand is covered with an anti-adhesive material, on the other is reinforced with aluminum foil. |
| The main geometric dimensions are: Width (mm) × Thickness (mm) |
(1÷-100)×(0,5÷5,0) |
| Operating temperature | from -60 °С to +160 °С |
| Bond strength with metal during peeling, N/m, not less | 300 |
| Yield resistance at 70 °С, 2h, mm, maximum | 2 |
| Shielding efficiency in the frequency range 30-3200 MHz at material thickness 2.0 mm, dB, not less than | 50 |
| Storage conditions | Store in the original packaging in a dry room, avoiding direct sunlight. The shelf life is 12 months. |
Method of application:
It is recommended to work with the Outline Emesk material at an air temperature of at least minus 10 °C. Work at an air temperature below minus 10 °C (but not below minus 20 °C) can be carried out only after holding the material at a temperature of plus 18 °C for 24 hours.
When working with a part Abris EMIsk-D, it is necessary to remove the anti-adhesive material, and apply the sealing side of the part to the work surface. Similarly, apply subsequent layers of the part, applying them butt-to-butt, avoiding gaps, or with minimal overlap (1-2 mm) along the length of the part, carefully rolling the overlap place with a rolling roller.
Industry
Ask your question
All fields marked with an asterisk (*) are required