RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Sealing tape Abris-LTiz
Section: Tapes
Packaging: corrugated cardboard boxes
TU: 2513-001-43008408-98
The sealant is in the form of a self-adhesive tape, which on the one hand is covered with an anti-adhesive material, on the other is reinforced with foamed polyethylene (isolon).
Scope of application:
thermal and sound insulation of vehicles.
Specifications:
Color: from white to black*
* it is possible to manufacture sealants of other colors in agreement with the customer (taking into account the production possibilities and the volume of the order).
Product form: rolls, segments.
Main technical characteristics:
| Material | The sealant is in the form of a self-adhesive tape, which on the one hand is covered with an anti-adhesive material, on the other is reinforced with foamed polyethylene (isolon). |
| The main geometric dimensions are: width (mm) × thickness (mm) |
(10,0÷250,0)×(1,0÷5,0) |
| Operating temperature | from -60 °С up to +100 °С |
| Water absorption,%, no more than | 0,2 |
| Strength of bond with metal during peeling, N/m, not less than | 150 |
| Yield strength at 140 °C, 2h, mm, no more | 2,0 |
| Storage conditions | Store in the original packaging in a dry place, avoiding direct sunlight. The shelf life is 24 months. |
Method of application:
Before applying the sealant, the work surface must be prepared - dried, cleaned of dirt and dust, and in winter from ice. Remove the exfoliated outer layer of rust and traces of corrosion from the rusty surface. Sealing works are not recommended to be performed at an outdoor temperature below -20 °C, in rain, snow, fog. If necessary, before applying Abris sealant, the surface must be treated with Abris Rp mastic.
At an outdoor temperature below plus 5 °C, work can be carried out only after the sealant has been held for 24 hours at a temperature not lower than plus 15 °C, it is recommended to use thermal equipment during installation.
It is necessary to remove the anti-adhesive coating from the tape, apply the tape with the sealing side to the work surface, press it tightly or roll it with a roller through the reinforcing coating.
When working with a sealant, no special protective equipment is required for workers.
Industry
Ask your question
All fields marked with an asterisk (*) are required