RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Sealing tape Abris S-LTdif
Section: Tapes
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99
A sealant in the form of a self-adhesive tape based on a non-woven fabric with two mounting butyl strips along the edges. On the one hand, the material does not allow moisture to pass through, on the other hand, it helps to filter steam.
Scope of application:
- external sealing of the joints of window and door blocks to the wall opening;
- protection of the thermal insulation layer.
Specifications:
Color: from gray to dark gray*
* it is possible to manufacture sealants of other colors in agreement with the customer (taking into account the production possibilities and the volume of the order).
Moisture-proof "breathable" diffusion-type tape is used for external sealing of joints (along the perimeter) when installing translucent structures and door blocks.
Main technical characteristics:
| Material | Durable diffusion tape made of polypropylene fabric with two self-adhesive mounting strips based on butyl rubber applied on one side. |
| The main geometric dimensions are: Width (mm) × thickness (mm) |
(50÷250) х 1,5 |
| Application temperature | not lower than -20 °С |
| Operating temperature | from -60 °С up to +70 °С (in agreement with the customer, the operating temperature range can be increased to +140 °C) |
| Water absorption,%, 24h, no more than | 0,30 |
| Strength of bond with metal during peeling, N/m, not less than | 400 |
| Strength of bond with concrete at separation, MPa, not less than | 0,1 |
| Yield resistance at 70 °С, mm, no more than | 2,0 |
| Storage conditions | Store in the original packaging in a dry place, avoiding direct sunlight. The shelf life is 24 months. |
Method of application:
Before applying the sealant, the working surface must be prepared — dried, cleaned of dirt and dust,and in winter from ice. Remove the exfoliated outer layer of rust and traces of corrosion from the rusty surface. It is necessary to remove the anti-adhesive coating from the tape, apply the tape with the sealing side to the work surface, press it tightly or roll it with a roller through the reinforcing coating. When working with the sealant, no special protective equipment is required for work.
Industry
Ask your question
All fields marked with an asterisk (*) are required