• 14.04.2022

Polymer-bitumen mastic Abris Ru-sh in cartridges

Section: tubes (cartridges)
Packaging: cartridge
TU: 5572-003-43008408-99
High-quality single-component polymer-bitumen mastic Abris Ru-sh, is a homogeneous paste-like mass of black color packed in cartridges. It can also be produced in metal sealed buckets. Mastic has a good self-adhesive ability to any dry, cleaned surfaces and high anticorrosive properties. It is characterized by high physical stability in case of temperature changes and other adverse weather factors.

Polymer-bitumen mastic Abris Ru-sh in cartridges

Scope of application:

Mastic Abris Ru-sh is designed for:

  • hydro-vapor insulation and anti-corrosion protection of building structures;
  • installation and repair of a soft mastic roof;
  • sealing of junctions of roofing, as an adhesive layer during repair sealing of the roof with laminated material;
  • gluing mating surfaces of waterproofing and polymer (elastomeric) films;
  • sealing joints (up to 5 mm) and joints in structures made of various materials (metal, concrete, plastic, rubber, wood, brick, etc.).

Specifications:

Base color: black

Product form: Paste-like mastic, drying on the basis of a gasoline solvent (white spirit), packed in a 310 ml cartridge (tube for a construction gun).

 

Main technical characteristics:

Indicator name Value
1 Appearance Pasty homogeneous mass
2 Penetration, 0.1 mm, within 280-350
3 Yield strength, at 70 °C, mm, no more 2,0
4 Mass fraction of dry matter, %, not less 50
5 Density, g/cm³ 0,9-1,1
6 Application temperature, °C from -15 to +40
7 Operating temperature range, °C from -60 to +160
8 Drying time, h, not less 24

Advantages

  • Water-vapor-proof.
  • Adaptability (mastic is ready for use, convenient to use);
  • Good adhesion to building materials (metal, concrete, foam concrete, glass, foam glass, brick, plastic, PIR, etc.).
  • Maintainability;
  • High plasticity;
  • Environmental safety;
  • Excellent self-adhesive properties;
  • Wide operating temperature range;
  • Application at temperatures from -15 °C to +40 °C
  • Resistant to aggressive environments.

Polymer-bitumen mastic Abris Ru-sh in cartridges

Instructions for use

Used equipment, tools, materials:

  • construction gun for sealant;
  • knife or scissors;
  • rags.

Preparation of the sealant: The mastic is completely ready for use and is applied with a construction gun.

Surface preparation: Clean the work surface from dust, dirt, ice and dry it. Remove the exfoliated outer layer of rust from the rusty surface.

Applying the sealant: Take the cartridge Abris Ru-sh from the box. Cut the cartridge nozzle at an angle of 45° to the required size (but not less than 5mm). Use a gun to apply the sealant to the work surface. Work should be carried out in rubber gloves, away from open sources of fire, in well-ventilated areas or outdoors.

Safety measures: When working with Abris  Ru-sh mastic, no special protective equipment is required for workers.

Storage conditions of the sealant: Store in dry rooms that protect from exposure to sunlight, atmospheric precipitation.

Industry

Construction.

Ask your question

All fields marked with an asterisk (*) are required

Rambler's Top100 Rambler's Top100 Рейтинг Досок Объявлений Яндекс цитирования