• 02.02.2024

The modern building materials market is replete with imported and domestic materials of both curing and non-curing types.  ZGM specialists recommend using non-curing materials of the Abris series for translucent structures.  What are the advantages, you ask?

The pros are obvious.  The operating temperature of materials is from -60 °C to + 180 °C.  Moreover, the preservation of the physical properties of materials (for example, flexibility, elasticity, gas and water resistance) at such temperature differences has been confirmed by tests.  Abris sealants are highly deformation and weather resistant.  Special biocidal additives protect premises from the formation of mold, fungi and unpleasant odors.

Correct sealing during construction allows you to fully experience the cost savings when maintaining universal winter gardens.  Owners do not have to spend much effort to keep warm.  The use of Abris materials is an energy-saving technology.

Self-adhering sealing materials Abris have excellent adhesion to various surfaces.  The foundation of the winter garden, joints of aluminum profiles and glass elements can be sealed without hassle.  When installing moving parts (windows or doors), Abris series sealants are again indispensable.

According to experts and consumers, non-curing self-adhesive sealants are very technological, that is, easy to use.  It is enough for the master to simply cut off the required length of tape or cord from the roll, remove the anti-adhesive coating (paper, film) and apply the material to the work surface.

Of course, sealing materials are not decorative elements.  After the construction of the winter garden, they are not visible, because the joints are closed with decorative overlays, panels.  But if you don't notice, and the master forgets to carry out a good sealing, then very soon the winter garden will no longer be a favorite corner of the house.  There will be drafts, condensation will appear, and then mold.  ZGM specialists recommend: be attentive to the quality of the work performed.  Make your winter garden a perpetual garden.

The advantages of this type of installation are:

1. Fulfillment of all requirements of the state standard GOST 30971-2002 “Seams of assemblies of connections of window blocks to wall openings. General specifications».
2. Reliable protection of the mounting foam layer.
3. No assembly foam waste.
4. Reduction of terms of installation works.
5. Reliable sealing of mounting joints of various configurations and sizes.

If you make the installation, thus, the windows will serve for a long time, reliably protect against frosts and damp. There will be no through or fungus in your house.

Materials used:

Polymer-bitumen mastic Abris Ru-sh in cartridges

Section: tubes (cartridges)
Packaging: cartridge
TU: 5572-003-43008408-99
High-quality single-component polymer-bitumen mastic Abris Ru-sh, is a homogeneous paste-like mass of black color packed in cartridges. It can also be produced in metal sealed buckets. Mastic has a good self-adhesive ability to any dry, cleaned surfaces and high anticorrosive properties. It is characterized by high physical stability in case of temperature changes and other adverse weather factors.

Abris SM-B 260/320 in tubes for a construction gun

Section: Tubes (cartridges)
Packaging: Tube for a construction gun
TU: 5775-004-52471462-2003

Butyl rubber mastic in the form of a homogeneous pasty mass of a drying type based on a gasoline solvent, packed in a 310 ml cartridge (tube for a construction gun). Ready for use.

Primer Abris VRP-50

Section: Primers
Packaging: plastic cans
TU: 2316-009-52471462-2007

Sealant Abris S-B in file-packages

Packaging: file-package
TU: 5772-003-43008408-99

Abris S-B sealant is an uncured mastic-polymer material packed in a file bag for a pneumatic pistol or a hand gun for applying sealants.