Sealing Materials Plant
Manufacturer of materials and technologies Abris.
LLC "Sealing Materials Plant" offers materials Abris for inclusion in the "cold" and "hot" sealing kits for cable fittings for electrical, fiber-optic communication cables and cable radio systems.
Materials for the "cold" method of sealing are elastic, high-strength, weather-resistant tapes with high adhesive, insulating and anti-corrosion properties. The materials have a chemically resistant base, do not deteriorate under the action of concentrated alkalis, weak acids, sea water, sharp temperature fluctuations, and work reliably under vibration loading.
Technical data
№ | Technical data | Name of tapes | Note | |
Abris K-S-LB |
Sealant Abris K-S-LTvinyl |
|||
1 | Standard sizes *, mmxmm |
38х3 |
38х0,6 | The technical characteristics of the tapes are similar to those of the 3M company, Scotchfil, Scotch VM, Scotch 2900 |
2 | Color * | Grey, black | black | |
3 | Reinforcing coating | - | pvc | |
4 | Tensile strength, MPa | 0,04 | 0,025 | |
5 | Maximum elongation,% | 1500 | 500 | |
6 | Adhesive strength, N / m, not less | 1500 | 600 | |
7 | Operating temperature, ° С | -60 up to +140 | -60 up to +140 | |
8 | Packaging | cardboard boxes | cardboard boxes | |
9 | Warranty shelf life | Not less than 12 months | Not less than 12 months |
* It is allowed to change standard sizes and colors of belts at the request of the customer.
Application area of sealing tapes
For inclusion in the kits of the "hot" method of sealing, we offer hot melt glue brand Abris TU 2242-001-52471462-2009 in the form of tapes with a width of (2.0-100.0) mm and a thickness (0.5-5.0) mm or harnesses of diameters (1.7-40.0) mm. Color - light yellow. Scope of application: adhesive layer under the tubes HERE, restoration of the protective covers of the cable.
Technical data
№ | Technical data | Name of the melt glue |
Hot melt adhesive Abris | ||
1 | Softening temperature (“ring and ball» method), ° С | 87 |
2 | Specific volumetric electrical resistance,, omхsm, not less | 1х1014 |
3 | Electrical strength at frequency 50 Hz, kV/mm, minimum | 40 |
4 | Water absorption,% | 0,03 |
5 | Elongation at break,%, minimum | 120 |
6 | Glue strength during peeling, kN/m, minimum | 2,4 |
7 | Frost resistance, ° С | -40 |
For sealing of cable penetrations we offer sealing material Abris S-B TU 5772-003-43008408-99 or fire-retardant intumescent sealant Abris K-B TU 2513-006-52471462-2005, produced in the form of briquettes or bundles with diameter up to 40 mm.
№ | Technical data | Name | |
Abris S-B |
Abris K-B |
||
1 | Base | Synthetic rubbers with mineral fillers | Synthetic rubbers with thermally expandable fillers |
2 | Color | Grey | Dark grey |
3 | Peeling adhesion strength, N / m | 100 | 100 |
4 | Oxygen index,% according to GOST 12.1.044 | <20 | 39 |
5 | Temperature resistance | short-term up to 200 °С | increase in volume from 160 °С |
6 | Flame non-proliferation as per GOST 12176 | combustible | fades out after removing the burner |
7 | Operating temperature, °С | -60 up to +140 | -60 up to +140 |
8 | Installation temperature, °С | not less -20 | not less -20 |
9 | Warranty period of storage | 12 months | 12 months |
Section: Briquettes
Packaging: polypropylene bags
TU: 5772-003-43008408-99
Mastic-polymer sealant in the form of a briquette of any shape (rectangular, oval, etc.) in an anti-adhesive or polyethylene film.
Section: Briquettes
Packaging: corrugated cardboard boxes
TU: 2513-006-52471462-2005
Sealant in the form of a briquette wrapped in an anti-adhesive material.
Section: Tapes Packing: corrugated cardboard boxes
TU: 2513-006-52471462-2005
Sealant in the form of a self-adhesive tape, which is coated with anti-adhesive material on one side and reinforced with a vinyl film on the other.
Ask your question
All fields marked with an asterisk (*) are required