• 25.02.2022

To seal the joints of metal corrugated structures consisting of two or more segments, bandage joints are used.

To seal the connection of this design, it is used:

1. Abris S-LTnp 150x2.
2. Abris S-DB 200x2000x3 (galvanized steel coated with sealant).
3. Abris S-Sh Ø from 20 to 40 mm produced by LLC "Sealing MaterialsPlant".

Sequence of actions

1. Apply Abris S-LTnp 150x2 sealing tape to the joint

2. Installation of the bandage on the pipe

3. View inside the pipe and laying in the trench

Advantages

1. Abris sealant is easily applied when joining two pipe segments, has good adhesion to the materials.
2. As a result of operation, the sealant retains elasticity, integrity, and prevents damage at the junction of pipes under the bondage.
3. The sealant Abris S-LTnp prevents corrosion of the outer surfaces of the segments when joining pipes.
4. The sealant Abris S-LTnp shows high rates of sealing of connections in the construction of twisted pipes.
5. When removing the bandage, the sealant is not damaged.
6. Abris sealant, when compressed by bondage, fills all the irregularities of the joint, which contributes to the tightness of the joint.

Materials used:

Sealant Abris S-DB

Section: Details
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99
Sealant in the form of a self-adhesive part, which is covered on both sides with an anti-adhesive material (internal reinforcement with galvanized steel is possible).

Sealing tape Abris S-LTnp

Section: Tapes
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99

The sealant is in the form of a self-adhesive tape, which is covered with an anti-adhesive material on the one hand, with a non-woven fabric on the other.

Sealant Abris S-Sh

Section: Cords
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99

Sealant in the form of a self-adhesive cord, which is covered with an anti-adhesive material.