• 15.04.2022

Anti-corrosion protection Abris at low temperatures

We offer materials and technologies for corrosion protection of steel product pipelines, tanks, reservoirs, repair of damaged areas of polymer coatings of underground pipelines. The application technology is adapted to protect pipelines of various diameters and requires minimal application costs. Insulation works can be carried out all year round (applying a sealing tape at temperatures down to -30 ° C).

Anti-corrosion protection Abris at low temperatures

Sealing tape Abris S-T is the type of mastic-polymer tapes of cold application, consisting of a polymer base with a layer of mastic material with a thickness of at least 1.6 mm applied to it on one side. Polymer wrappers of various types are used as the basis: polychlorovinyl, polyethylene, including radiation-modified ones.

It has high anticorrosive properties, resistance to chemically aggressive media, frost resistance up to -60° C and ductility at minus temperatures, meets the requirements of GOST 9.602-2005 "Underground structures. General requirements for corrosion protection, "was tested at AKH named after K.D.

Pamfilova, JSC" HyproNIIGaz. " The Abris S-T tape is used as part of the protective coating in structures No. 5 and No. 6 (very reinforced type) according to GOST 9.602-2005 with a thickness of up to 4.6 mm and 3.2 mm, respectively.

The mastic layer of the rubber-based Abris S-T tape provides high resistance of the material to vibration loads, contributes to the "self-healing" of defects due to the ductility and thickness of the tape and filling of surface terrain irregularities and is recommended for corrosion protection of equipment and pipelines subjected to vibration and dynamic loads.

Anti-corrosion technologies Abris

  • Corrosion protection of steel pipelines;
  • Protection of steel underground tanks and reservoirs;
  • Corrosion protection of pipe fittings;
  • Insulation of pipe joints.

Advantages of Abris C-T mastic-polymer tape technology

  • possibility to perform insulation works under conditions of negative temperatures up to -30 ° С;
  • processability of complex surfaces protection due to plastic-elastic and self-adhesive properties of the material;
  • cold application (without pre-heating);
  • using the simplest winding technique, the coating being easily applied both manually and mechanically;
  • possibility to manufacture protection of complex shaped elements;
  • the material is 100% ready for use
  • repair coating is well combined with all types of insulation used in corrosion protection, both with film and bitumen coatings;
  • the mastic layer of the tape, due to the plasticity and thickness of the tape, helps to fill the irregularities of the surface relief and "self-maiming" the defects;
  • does not require complex equipment, careful surface preparation and heating;
  • environmentally friendly.

Materials used:

Sealing tape Abris S-T-LTt

Sealing tape Abris S-T-LTt

Section: Tapes
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99

The sealant is in the form of a self-adhesive tape, which on the one hand is covered with an anti-adhesive material, on the other is reinforced with a heat-shrinkable film.


Ask your question

All fields marked with an asterisk (*) are required

Rambler's Top100 Rambler's Top100 Рейтинг Досок Объявлений Яндекс цитирования