15.04.2022

Use of Abris sealants in construction at negative temperatures

The sealing materials plant offers a set of sealing materials and technologies for operation at negative temperatures in various areas of the construction industry.

Scope of Application

Sealant Abris SM frost-resistant is designed to seal seams and joints in structures made of various materials (metal, concrete, glass, rubber, plastic, wood, brick, etc.) in buildings and structures of all types, anti-radon protection of new and reconstructed residential, public, communal and industrial buildings, for corrosion protection, heat - noise insulation of construction and metal structures and structures (tapes, tanks and etc.)

It has high stickiness to cold surfaces under conditions of negative temperatures up to minus 20 ° C.

Abris SM is an uncured plastic mixture based on a polymer binder and powdered fillers.

It is produced in the form of sealing products: ribbons, cords, parts, briquettes.

Abris Sealing Technologies in Construction

Foundation isolation waterproofing;
Sealing of deformation joints of buildings and structures with materials Abris;
Sealing of sandwich panels with Abris C materials;
Sealing of the roof and its elements;
Technology for sealing translucent structures;
Technology of sealing of joints and wall assemblies with Abris grade materials;
Technology of sealing of inter-panel joints with Abris grade materials;
Sealing of frame structures and structures of hangar type.

Benefits of frost resistant materials Abris

Increased stickiness to cold surfaces at temperature up to minus 20 ° С;
Waterproofing properties;
Gas and steam impermeability;
Corrosion protection;
Wide operating temperature range;
Processability of complex surfaces protection due to plastic-elastic and self-adhesive properties of material.

Standard sizes of products

Parameter	Brand
Parameter	Abris SM-LT and LB	Abris Sm-Sh	Abris SM-DT and DB	Abris SM-B *	Abris Sm-B48
product shape	tape	cord	detail	briquette	package file
width, mm	10 – 250	-	10 – 250	-
length, mm	3 – 60	3 – 60	on demand	-
thickness, mm	0,5-5	-	0,5-20	-
diameter, mm	-	1,7- 40	-	-	48

Specifications

Indicator name	Size
Preservation of ductility and stickiness at temperature up to minus 20 °С	keeps
Strength of bond with metal during peeling, kgf/cm, not less than	0,6
Bonding strength with fiberglass during peeling, kgf/cm,not less	0,25
Strength of bond with concrete at separation, MPa, not less than	0,10
Density, g/cm²	1,5
Operating temperature range, °С	from -60 up to +140
Water absorption,%, maximum	0,30
Resistance to fungi, point, no more	2
Radon diffusion coefficient 222Rn, cm²/s in a sample thickness of 2 mm, no more	0,42 · 10^-6
Radon diffusion length 222Rn, cm, not less	0,15
Color	on demand
Conditional shelf life, years	20

The range of products of the Abris SM-LT

Designation	Description	Application area
*Abris SM-LT np*	Tape reinforced with polymeric nonwoven fabric	Waterproofing of deformation seams, places of adjunctions. The tape is perfectly painted, plastered, grounded.
*Abris SM-LT m*	Metallized film reinforced tape	Protection of a heat-insulation layer against adverse natural factors, light-, heatreflection.
*Abris SM-LT f*	Aluminium foil reinforced tape	Intended for light-, warm-, sound insulation.
*Abris SM-LT iz* *Abris SM-LT fiz*	Tape reinforced with isolon or foil-isolon (of).	Warm, noise isolation of pipelines, air ventilation and air conditioning systems.
*Abris SM-LTpvc,* *Abris SM-LTpecom*	Tape reinforced with PVC film (PVC) or light stabilized polyethylene (pekom)	Waterproofing on the base, protection of the lower wreath of the wooden house.

Note: other types of reinforcing material are possible upon customer's request.

Materials used:

Sealant Abris S-B 80/100

Section: Briquettes
Packaging: polypropylene bags
TU: 5772-003-43008408-99
Mastic-polymer sealant in the form of a briquette of any shape (rectangular, oval, etc.) in an anti-adhesive or polyethylene film.

Sealant Abris S-DB

Section: Details
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99
Sealant in the form of a self-adhesive part, which is covered on both sides with an anti-adhesive material (internal reinforcement with galvanized steel is possible).