RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
X-ray protection of windows and doorways with vertical blinds Abris RZ
Vertical X-ray protective blinds Abris are designed to protect window openings, other building structures (glass partitions, doorways, etc.), protect personnel and the public from X-ray radiation in medical, research facilities, as well as residential and industrial buildings.
Assembly, installation and operation instructions
Install and operate the blinds in accordance with the manufacturer's assembly and installation recommendations.
When unpacking the product, be careful with cutting objects that may scratch the blinds.
Installation procedure for X-ray protection blinds Abris RZ
In advance, with the help of a measuring level, it is necessary to outline the places where the cornice will be attached. This is necessary in order to hang a strictly horizontal and high-quality cornice of vertical blinds.
X-ray protective blinds should go beyond the level of the window opening by 5-10 cm.
Ways to install vertical blinds:
to the ceiling;
to the wall.
fig.1
The cornice is fastened with latches, as shown in Figures (1A) and (1B).
In the first case (Fig.1A), the installation is carried out by pre-drilling holes for a dowel-nail, with which special metal fasteners are screwed to the ceiling, into which the cornice is snapped.
In the second case (Fig.1B), holes are pre-drilled in the wall to attach a special L-shaped bracket, to which the cornice of the vertical blinds is attached.
Procedure for assembling X-ray protective blinds
Important! The slats are hung on the hook of the slider from the side of the plastic grover, the decorative fabric is located on the side of the slider latch. The slats should sit firmly on the hook in the slot of the slider (see Fig. 3). |
Fig.2 |
For reliable mounting of the structure with increased weight, it is necessary to strengthen the brackets by combining the two brackets into one (superimpose one on the other).
The slats should move freely along the cornice, and after moving they should be fixed in a vertical position. The product must be installed in such a way that in the open state the slats are located at a distance of at least 2 cm from the heating devices. |
Fig.3 |
Materials used:
Vertical X-ray blinds Abris RZ
Packaging: corrugated cardboard boxes
TU: 22.23.14-022-52471462-2018
Abris vertical blinds are a structure consisting of vertical lamellae based on the radiation protective material Abris RZ (Specification 6990-012-52471462-2009). Lamellae are inserted into plastic groovers. The front side of the lamellae is covered with a fabric impregnated with special water, dust repellent, and antibacterial compositions. Fabrics are used in different colors.
Ask your question
All fields marked with an asterisk (*) are required