01.01.2016

Radiation protection technology Abris for industrial facilities

Abris RZ materials have radiation-protective properties with varying degrees of lead equivalent or attenuation multiplicity. Designed to protect building structures from ionizing radiation at nuclear power plants (NPP) and other industrial facilities, in scientific and industrial premises.

At radiation-loaded nuclear power facilities, the violation of the waterproofing of building structures causes operational and environmental damage.

We offer to use Abris RZ materials for radiation protection of existing building structures (concrete, metal, etc.): foundations, roofs and enclosing structures of objects, cooling system water pipes, waste storage pools, open hydraulic structures, etc.

Diagram of a typical design of a radiation-protective coating

1. building structure;
2. primer Abris Rp or Abris VRP;
3. material Abris RZ;
4. false wall.

The Abris radiation protection technology is recommended to use:

In the manufacture of portable radiation shields for the protection of nuclear power plant personnel;
Device engineering barriers as material biological protection, radiation protection, hydro-vapor barrier properties, in particular, under conditions of constant pressure the ground and chemically aggressive waters in the construction of nuclear power facilities (places of burial of radioactive waste, in the regions of radiation contamination of the soil, the construction of facilities that reduce background radiation, enhance the protective properties of waterproofing and shelters from ionizing radiation, the radiation shelters device, etc.);
As shielding materials process equipment when performing maintenance;
Construction of burial grounds and special storage facilities that contain and restrict the movement of radionuclides and toxic substances from the places of their localization, etc.

Competitive advantages of Abris RZ materials:

Reliability of insulation of surfaces of complex configuration, curved surfaces and places of abutment of various structural elements of the room due to the plastic-elastic and self-adhesive properties of the material;
The ability to adjust the thickness of the protective coating by layering the material;
The ability to manufacture products of the required size in thickness, width and length;
Ease of machining (cutting to size, fixing);
The ability to quickly fix it in any spatial position;
Adaptability and reduction of labor intensity of work;
The possibility of carrying out installation work at temperatures up to minus 20°C.

Materials used:

Radiation-protective material Abris RZsk-01-Sh

Section: Cords
Packing: corrugated cardboard boxes
TU: 6990-012-52471462-2009
Baritone filled material Abris RZsk-01-Sh in the form of a self-adhesive cord, which is covered with anti-adhesive material.

Industrial Barite Panel Abris

Section: Panels
TU: 23.99.19-021-52471462-2017
Abris barite panel for industrial use is a combined panel consisting of a radiation-protective part (barite-filled Abris material, lead plate), lined with galvanized steel. The thickness and design of the radiation protection part is formed depending on the required lead equivalent.

Barite Panel Abris

Section: Panels
TU: 23.99.19-021-52471462-2017
A combined panel consisting of a radiation-protective part (barite-filled material Abris RZ, lead plate) and construction and finishing material (glass-magnesium sheets, glass-cement panels, metal sheets, plasterboard sheets, etc.). The back side of the panel is covered with a protective film. The thickness and design of the radiation protection part is formed depending on the required lead equivalent.

Radiation-protective material Abris RZsk-01-LT

Section: Tapes
Packaging: corrugated cardboard boxes
TU: 6990-012-52471462-2009
Barite-filled material Abris RZsk-01-LT in the form of self—adhesive tape, which is covered on the one hand with anti-adhesive material, on the other hand - reinforcing radiation-resistant or other material at the request of the customer.