RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Sealant Abris Mh-B
Section: Briquettes
Packaging: corrugated cardboard boxes
TU: 5772-010-52471462-2008
Sealant in the form of a briquette wrapped in an anti-adhesive material.
Scope of application:
- sealing of flanges and housings of industrial and household refrigerators;
- sealing of equipment used in the food industry in places excluding direct contact;
- sealing the joints of thermal insulation panels from moisture penetration both inside the refrigerator and into the heat insulator;
- sealing of thermal insulation panel assemblies in the places where the slats are used;
- sealing the outlet of the pipes from the evaporator and the refrigerator;
- sealing of seams of external and internal cabinets of refrigerators and freezers (without contact with the air of food storage chambers).
Specifications:
Product form: briquettes.
Main technical characteristics:
| Material | Sealant in the form of a briquette wrapped in an anti-adhesive material |
| Operating temperature | from -60 °С to +140 °С |
| Water absorption,%, 24h, maximum | 0,30 |
| Strength of bond with metal during peeling, N/m, not less than | 150 |
| Resistance to flow at 70 °С, mm, no more | 2,0 |
| Storage conditions | Store in the original packaging in a dry room, avoiding direct sunlight. The shelf life is 24 months. |
Method of application:
Before applying the sealant, the work surface must be prepared — dried, cleaned of dirt, dust. Remove the exfoliated outer layer of rust and traces of corrosion from the rusty surface.
The briquette of the Abris Mh-B brand, wrapped in an anti-adhesive material, is released from the packaging and applied to the work surface using special installations and devices (worm installation, manual or pneumatic syringe, etc.) or manually.
Sealing works are recommended to be carried out at an outdoor temperature of at least -10 °C. Sealing work at an air temperature below minus 10 °C (but not below minus 20 °C) can be carried out only after holding the sealant at a temperature of plus (25-30) °C for 24 hours.
When working with a sealant, no special protective equipment is required for workers.
Branch
Ask your question
All fields marked with an asterisk (*) are required