RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Sealant Abris S-B 80/100
Section: Briquettes
Packaging: polypropylene bags
TU: 5772-003-43008408-99
Mastic-polymer sealant in the form of a briquette of any shape (rectangular, oval, etc.) in an anti-adhesive or polyethylene film.
Scope of application:
- sealing of joints in structures made of various materials (metal, glass, concrete, foam glass, rubber, plastic, wood, brick);
- sealing of the abutments of roof elements: roofs to the parapet (wall), drain funnel on a flat roof, etc.;
- waterproofing of elements of highways, bridges and transport tunnels, buildings and structures of all types;
- for household purposes.
Specifications:
Color: from gray to dark gray*
*it is possible to manufacture sealants of other colors in agreement with the customer (taking into account the production possibilities and the volume of the order).
Product form: briquettes.
Sealant can be manufactured in frost-resistant version Abris Sm-B and not supporting combustion Abris Stg-B.
Main technical characteristics:
| Material | Mastic-polymer sealant in the form of a briquette of any shape |
| Application temperature | not lower -20 °С |
| Operating temperature | from -60 °С to +70 °С (in agreement with the customer, the operating temperature range can be increased to +140 °C) |
| Water absorption,%, 24h, maximum | 0,30 |
| Penetration, 0.1 mm, within | 80-100 |
| Strength of bond with metal during peeling, N/m, not less than | 100 |
| Tensile strength, MPa, not less | 0,008 |
| Elongation at maximum load, %, not less | 35 |
| Resistance to flow at 70 °С, mm, no more | 2,0 |
| Flame Propagation (Surface Flame Propagation Group) | Flame Propagation 1* |
| Storage conditions | Store in the original packaging in a dry room, avoiding direct sunlight. The shelf life is 24 months. |
* The indicator applies only for Abris Stg-B sealant.
Method of application:
It is not recommended to perform sealing works at ambient air temperature below minus 20 °С, at rain, snow and fog.
Remove the peelable outer layer of rust from the rusty surface. The wet, dusty surface should be wiped with dry and clean wiping material.
The recommended temperature of the sealant during application should be in the range from plus 10 °С to plus 40 °C. At an outside air temperature below plus 5 °С, the work can be carried out only after holding the sealant for 24 hours at a temperature not lower than plus 15 °С, during installation it is recommended to use thermal equipment.
At negative temperatures up to minus 20°C it is recommended to use Abris Sm sealing compound (frost-resistant design).
When working with grade B sealing compound, it is necessary to remove the release coating and apply it to the working surface using special installations and devices (worm unit, manual or pneumatic syringe) or manually.
When working with a sealant, no special protective means are required for workers.
Industry
Ask your question
All fields marked with an asterisk (*) are required