RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Sealant Abris Ms-Sh
Section: Cords
Packing: corrugated cardboard boxes
TU: 5772-010-52471462-2008
Sealant in the form of a self-adhesive cord, which is coated with an anti-adhesive material.
Application area:
sealing of industrial and domestic facilities.
Specifications:
Color: from white to gray.
Product form: roll, pieces.
Abris Ms-Sh is used in the construction and repair of buildings and structures of types A-B as a sealing material (therapeutic and preventive, sanatorium-resort institutions).
Main technical characteristics:
| Material | sealant in the form of a self-adhesive cord, which is coated with an anti-adhesive material. |
| Basic geometric dimensions: Diameter, mm |
1,7×40,0 |
| Application temperature | not lower than -20 °С |
| Operating temperature | from -60 °С to +140 °С |
| Water absorption, %, 24 hours, no more | 0,30 |
| Strength of bond with metal during peeling, N/m, not less than | 150 |
| Strength of connection with concrete at separation, MPa, not less than | 0,10 |
| Flow resistance at 70 °С, 24 h, mm, max | 2,0 |
| Storage conditions | Store in its original packaging in a dry place, away from direct sunlight. Shelf life is 24 months. |
Mode of application:
- Before applying the sealant, the working surface must be prepared - dried, cleaned of dirt and dust, and in winter from ice. From the rusty surface, remove the peeling outer layer of rust and traces of corrosion;
- Before installing the cord, the anti-adhesive coating is removed from one side;
- The cord is installed on the surface by pressing it in any mechanical way through a layer of anti-adhesive coating. At the same time, a tight, gap-free fit of the cord to the surface should be ensured. It is recommended to press the cord in such a way that, as a result of its plastic deformation, the contact surface of the cord and the protected surface is not less than the diameter of the cord;
- Then the anti-adhesive coating is removed completely.
When working with sealant, no special protective equipment is required for workers.
Sealing works are recommended to be carried out at an air temperature of at least minus 10°C.At air temperatures below minus 10 °C (but not below minus 20 °C), it can be carried out only after the sealant has been kept at a temperature not lower than plus 15°C for 24 hours; it is recommended to use thermal equipment during installation.
Industry
Ask your question
All fields marked with an asterisk (*) are required