RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Sealant Abris S-Sh
Section: Cords
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99
Sealant in the form of a self-adhesive cord, which is covered with an anti-adhesive material.
Scope of application:
- sealing of joints in structures made of various materials (metal, glass, concrete, rubber, plastic, wood, brick);
- anti-radon protection of buildings of all types;
- anti-corrosion protection of the outer surfaces of ground building and metal structures (pipelines, tanks, etc.);
- waterproofing elements of roads, bridges and transport tunnels, buildings and structures of all types;
- sealing of joints of log walls, sealing of cracks in logs, thermal insulation and sealing of the inter-wall space;
- for domestic purposes.
Color: from gray to dark gray*
*it is possible to manufacture sealants of other colors in agreement with the customer (taking into account the production possibilities and the volume of the order).
Product form: roll, segments.
Sealant Abris S-Sh can be made:
- in frost-resistant version - Abris Sm-Sh (has increased plasticity and stickiness to cold surfaces in conditions of negative temperatures down to minus 20 °С);
- in bioresistant version - Abris Strop-Sh (for operation in tropical and subtropical climates).
Main technical characteristics:
| Material | Mastic-polymer or polymer-bitumen material in the form of a cord, coated with anti-adhesive material. |
| Basic geometric dimensions: Diameter, mm; |
1,8-40 |
| Application temperature | Not lower than -20 °С |
| Operation temperature | from -60 °С to +70 °С (in agreement with the customer, the operating temperature range can be increased to +140 °C) |
| Water absorption, %, 24h, no more | 0,30 |
| Bond strength with metal during peeling, N/m, not less | 400 |
| Bond strength with concrete at separation, MPa, not less | 0,1 |
| Strength of bond with wood at separation, MPa, not less than (indicator of sealant intended for wooden housing construction) |
0,1 |
| Diffusion coefficient of radon 222Rn, cm2/s, in sample thickness 2 mm, not more than | 0,42·10-6 |
| Yield strength at 70 °C, mm, no more | 2,0 |
| Storage conditions | Store in the original packaging in a dry room, avoiding direct sunlight. The shelf life is 24 months. |
Method of application:
- 1.Before applying the sealant, the work surface must be prepared — dried, cleaned of dirt and dust, and in winter from ice. Remove the exfoliated outer layer of rust and traces of corrosion from the rusty surface;
- 2.When working with a sealant, remove the anti-adhesive coating on one side of the cord.
- Apply the cord to the work surface, press it tightly or roll it with a roller.
- 4.Remove the remaining anti-adhesive coating.
When working with the sealant, no special protective equipment is required for the work.
When working with sealant grade Sh for wooden housing construction, it is recommended to seal the joints in accordance with the design decision and the manufacturer's instructions, taking into account the type of material used (rounded logs, profiled or glued beams, etc.); the degree of wood moisture (natural or after chamber drying); construction technology.
Sealing works are not recommended to be performed at an outdoor air temperature below minus 20 °C, in rain, snow and fog. The recommended sealant temperature during application should be between plus 10 °C and plus 40 °C. At an outside air temperature below plus 5 °C, work can be carried out only after the sealant has been exposed for 24 hours at a temperature not lower than plus 15 °C; it is recommended to use thermal equipment during installation.
At negative temperatures down to minus 20 °C, it is recommended to use Abris Sm brand sealant (frost-resistant version).
Ask your question
All fields marked with an asterisk (*) are required