RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Sealant Abris-Shtg
Section: Cords
Packing: corrugated cardboard boxes
TU: 2513-001-43008408-98
The cord is flame retardant, coated with anti-adhesive material.
Application area: sealing vehicles.
Black color.
Output form: roll, pieces.
Main technical characteristics:
| Material | The cord coated with anti-adhesive materialThe cord coated with anti-adhesive material |
| Basic geometric dimensions: Diameter, mm |
1,7 ÷ 40,0 |
| Application temperature | not lower than -20 °С |
| Operating temperature | from -60 °С to +140 °С, short-term up to +160 °C |
| Water absorption, %, no more | 1,0 |
| Strength of bond with metal during peeling, N/m, not less than | 150 |
| Flow resistance at 140 °С, 2h, mm, no more | 2,0 |
| Flammability, mm/min, no more | 100 |
| Storage conditions | Store in its original packaging in a dry place, away from direct sunlight. Shelf life is 24 months. |
Method of application:
Before applying the sealant, the work surface must be prepared — dried, cleaned of dirt and dust, and in winter from ice. Remove the exfoliated outer layer of rust and traces of corrosion from the rusty surface. If necessary, before applying the sealant, the surface must be treated with a primer waterborne Abris VRP.
It is not recommended to perform sealing work at an outdoor temperature below minus 20 °C, in rain, snow, fog. At an outdoor temperature below plus 5 °C, work can be carried out only after holding the sealant for 24 hours at a temperature not less than plus 15 °C, it is recommended to use thermal equipment during installation.
When working with the cord, it is necessary to remove the anti-adhesive coating from one side of the cord, apply the cord to the work surface, press it tightly or roll it with a roller, remove the remaining anti-adhesive coating.
When working with a sealant, no special protective equipment is required for working
Industry:
Ask your question
All fields marked with an asterisk (*) are required