• 09.03.2022

Abris-DBms sealing compound

Packaging: corrugated cardboard boxes
TU: 2513-001-43008408-98

A mastic-polymer layer in the form of a part coated on both sides with an anti-adhesion material.

Abris-DBms sealing compound


The sealant is designed to protect process and capacitive equipment from mineral, vegetable, machine oils and other oil media.


Color: from white to gray

Product Release Form: Part.

Main technical characteristics:

Method of application:

Material mastic-polymer layer in the form of a part coated on both sides with an anti-adhesion material
The main geometric dimensions are:
width (mm) × thickness (mm)
(5,0÷ 250,0)× (1,0÷5,0)
Application temperature not lower than -20 °С
Operating temperature From -45 °С to + 100 °С, short time up to + 120 °С
Water absorption,%, maximum 0,20
Strength of bond with metal during peeling, N/m, not less than 150
Yield resistance at 140 °С, 2h, mm, maximum 2
Oil resistance by weight change,% 0 to 5
Storage conditions Store in the factory package in a dry room, avoiding direct sunlight. The shelf life is 24 months.

Before applying the sealant, the work surface must be prepared — dried, cleaned of dirt and dust, and in winter from ice. Remove the exfoliated outer layer of rust and traces of corrosion from the rusty surface.

Sealing works are not recommended to be performed at an outdoor temperature below minus 20 °C, in rain, snow, fog. If necessary, before applying the sealant, the surface must be treated with Abris Rms mastic, or degreased with acetone. If the outside air temperature is below plus 5 °C, work can be carried out only after the sealant has been held for 24 hours at a temperature not lower than plus 15 °C, it is recommended to use thermal equipment during installation.

When installing Abris ms sealant, short-term exposure to temperatures up to plus 120 °C is possible.

The anti-adhesive coating must be removed from the part, the part must be applied to the work surface, pressed tightly or rolled with a roller through the anti-adhesive coating.

When working with a sealant, no special protective equipment is required for workers.


Shipbuilding, Mechanical engineering.

Ask your question

All fields marked with an asterisk (*) are required

Rambler's Top100 Rambler's Top100 Рейтинг Досок Объявлений Яндекс цитирования