• 13.04.2022

A sealant in the form of a self-adhesive part, which is covered on one side with an anti-adhesive material and on the other side with a reinforcing one.

Scope of application:

• sealing of flanges and housings of industrial and household refrigerators;
• sealing of equipment used in the food industry in places excluding direct contact;
• sealing the joints of thermal insulation panels from moisture penetration both inside the refrigerator and into the heat insulator;
• sealing of thermal insulation panel assemblies in the places where the slats are used;
• sealing the outlet of the pipes from the evaporator and the refrigerator;
• sealing of seams of external and internal cabinets of refrigerators and freezers (without contact with the air of food storage chambers).

Characteristics:

Color: at the request of the customer.

Product Release Form: parts.

Main technical characteristics:

Method of application:

Before applying the sealant, the work surface must be prepared - dried, cleaned of dirt, dust. Remove the exfoliated outer layer of rust and traces of corrosion from the rusty surface.

It is necessary to remove the anti-adhesive paper from Abris Mh-DT tape and press it to the working surface of the product through a layer of anti-adhesive coating. At the same time, a tight, gap-free fit of the sealant to the surface should be ensured.

Sealing works are recommended to be carried out at an outdoor temperature of at least -10 °C. Sealing work at an air temperature below minus 10 °C (but not below minus 20 °C) can be carried out only after holding the sealant at a temperature of plus (25-30) °C within 24 hours.

When working with a sealant, no special protective equipment is required for workers.

Industry

Refrigeration industry.