• 13.04.2022

Vibration damping unit Abris VBD, not supporting burning

Section: Parts
Packaging: corrugated cardboard boxes
TU: 2513-003-52471462-2001
Self-adhesive material in the form of a tape or part, duplicated with foil and coated with anti-adhesive material.

Vibration damping unit Abris VBD, not supporting burning

Scope of application:

  • vibration and noise insulation of building structures, premises, various household and engineering equipment;
  • vibration and noise insulation of motor vehicles (cars, buses, agricultural machinery, etc.), water vessels, etc.


Color: from brown to black

Product form: parts or tapes.

Main technical characteristics:

Grades VBD-1tg, VBD-2tg are self-adhesive, grade VBD-1Ttg is self-adhesive and weldable at temperatures up to 190 °C.

Indicator name Brands
VBD-1tg VBD-2tg VBD-1Ttg
Appearance  Self-adhesive material in the form of tapes or parts duplicated with foil and covered with anti-adhesive material. Welding material in the form of tapes or parts
Operating temperature from -60 °С to +160 °С
Strength of bond with metal during peeling, N/m, not less than 600 400
Yield resistance at 160 °С, 2h, mm, maximum 2
Vibration damping coefficient at a frequency of 200 Hz in a thickness of 2.5 mm 0,1-0,12 0,2-0,25 0,1-0,13
Burning rate according to GOST 25076-81, mm/min, no more 100
Flame propagation according to GOST 30444-97, kW/m2 8-11
 Storage conditions Store in the factory package in a dry room, avoiding direct sunlight. The shelf life is 24 months.

Method of application:

The brands VBD-1tg, VBD-2tg are self-adhesive, the brand VBD-1TG is self-adhesive and deposited at temperatures up to 190 °C.

Self-adhesive brands of the vibration damping block have a good self-adhesive ability to any dry surfaces.

When working with the unit, the use of special protective equipment for workers is not required.

Installation is carried out at an ambient temperature of at least plus 15 °C. When storing the unit at negative temperatures before installation, the unit must be kept in a room with an air temperature of at least plus 15 °C for 24 hours.

Before using the unit, the working surface of the structure (housing) of the product must be drained and cleaned of dirt and dust.

The self-adhesive stamps of the block are insulated on one side with an anti-adhesive coating. Before use, the anti-adhesive coating is removed from the block, and the block is glued to the work surface.

The deposited grades are placed on horizontal surfaces and surfaces with a slope of no more than 45 °С and subjected to temperature exposure up to 190 °C for 0.5 hours.


Construction, shipbuilding.

Ask your question

All fields marked with an asterisk (*) are required

Rambler's Top100 Rambler's Top100 Рейтинг Досок Объявлений Яндекс цитирования