Sealing Materials Plant
Manufacturer of materials and technologies Abris.
Packaging: file-package
TU: 5772-003-43008408-99
Abris S-B sealant is an uncured mastic-polymer material packed in a file bag for a pneumatic pistol or a hand gun for applying sealants.
Application area:
Characteristics:
Color: grey.
Release form: file package.
Depending on the penetration range (consistency), Abris S-B sealant is divided into the following types:
All types of Abris S-B sealant can be manufactured not supporting combustion - Abris STG-B.
Main technical characteristics:
№ | Indicator name | Abris S-B |
||
S-B200/220 |
SM-B 250/330 |
STG-B 260/320 |
||
1 | Appearance | Plastic homogeneous mass | ||
2 | Color | upon agreement with the customer | ||
3 | Dry matter mass fraction,%, not less than | - | 85 | |
4 | Penetration, 0.1 mm, within | 200-220 | 250-330 | 260-320 |
5 | Water absorption, %, 24h, no more | 0,30 | ||
6 | Flow resistance, at 70 °С, mm, max | 2,0 | ||
7 | Flame Propagation, (Surface Flame Propagation Group) | Flame Propagation 1* | Flame Propagation 1* |
* The indicator applies only for Abris Stg-B sealant.
Overall characteristics and marking of products:
sealant Abris S-B Ø 48, volume 600 ml;
sealant Abris S-B Ø 78, volume 1300 ml.
Advantages:
Instructions for us:
Used equipment, tools, materials:
Preparation of the sealant: The sealant is completely ready for use and does not require preheating. The minimum outside air temperature for application is -10 °C.
Surface preparation: Clean the work surface from dust, dirt, ice and dry. Remove the peelable outer layer of rust from the rusty surface.
Sealant application: Take out the file-package with material Abris S-B from the box. Cut off the clip from the file package with a knife or scissors. Insert the package file into the gun. Cut the nozzle on the gun at an angle of 45° to the required size (but not less than 5mm). Apply sealant to the work surface using an air gun or hand gun.
Sealant storage conditions: Store in a dry place.
Security measures: When working with Abris S-B sealant, no special protective equipment is required for workers.
This material can be purchased in a frost-resistant version - Abris Sm-B Ø 48, which is designed for work at low temperatures (up to -20 °С). The material has increased plasticity and stickiness to cold working surfaces.
Ask your question
All fields marked with an asterisk (*) are required