Mastic Abris E M

Packaging: metal barrels, cans, plastic buckets

TU: 5775-004-52471462-2003

Mastic in the form of a homogeneous paste-like mass, applied with a spatula.Color - from light gray to black.

Application area:

mastic Abris E M is used for sealing welds in the automotive industry, mechanical engineering.

Characteristics:

Color: from light gray to black..

Product release form: pasty mastic, drying, based on a gasoline solvent (white spirit).

Main technical characteristics:

Abris E M	Mastic in the form of a homogeneous pasty mass
Operating temperature	from - 60°С to + 160°С
Penetration, 0.1 mm	200-400
Flow resistance at 160°С, 2h, mm, no more	2
Specific volume electrical resistance, Ohm x cm, no more	106
Storage conditions	Store in the original packaging in a dry place, away from direct sunlight. Shelf life - 12 months.

Mode of application:

Before applying the sealant, the work surface must be prepared - dried, cleaned of dirt and dust. From the rusty surface, remove the peeling outer layer of rust and traces of corrosion.
Apply mastic to the work surface with a spatula. When stored at an outside air temperature below minus 10°C, the mastic should be kept for 24 hours at a temperature of (20 ÷ 2)°C before use. When working with mastic, no special protective equipment is required for workers.

Industry

Mechanical engineering.

Ask your question

All fields marked with an asterisk (*) are required