Mastic Abris Rms

Packaging: metal barrels, cans, plastic buckets
TU: 5775-004-52471462-2003

The mastic is oil resistant.

Application area:

surface preparation before applying oil-resistant sealant Abris Ms;
sealing of detachable assemblies, flange and bolted connections of various car assemblies.

Colour: from white to gray

Release form: pasty mastic, drying, based on ethyl cellosolve solvent.

Main technical characteristics:

Material Abris	Mastic in the form of a homogeneous paste-like mass
Operating temperature	From -45 °С to +100 °С
Vapor permeability, mg/mh Pa, no more	0,01
Penetration, 0.1 mm	300-350
Yield resistance, mm, in thickness 1-2 mm, no more	2

Mode of application:

1.Before use, the mastic should be thoroughly mixed, if necessary, diluted with a solvent;
Before applying the mastic, the work surface must be prepared - dried, cleaned of dirt, dust, ice, snow or frost. From the rusty surface, remove the peeling outer layer of rust and traces of corrosion;
Mastic Abris Rms is applied with a brush. Work should be carried out with gloves, away from open sources of fire, in well-ventilated areas or in the open air. Drying time at a temperature of 20 °C is at least 12 hours. The drying time of the mastic depends on the solvent included in the composition, the ambient temperature. Consumption of mastic Abris Rms when applied with a brush in one layer (60-100) microns thick is 0.5 kg per 1 m².

Ask your question

All fields marked with an asterisk (*) are required