RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Mastic Abris Ru-sh
Packaging: metal barrels, cans, plastic buckets
TU: 5775-004-52471462-2003
Bitumen-polymer mastic in the form of a homogeneous paste-like mass, applied with a brush. Black colour.
Application area:
- preparation of the working surface before applying sealants;
- sealing joints, filling irregularities, pores, roughness in structures made of various materials, in residential and civil construction, used for outdoor work.
Characteristics: Black colour.
Output form: Mastic paste-like, drying, based on a gasoline series solvent (white spirit).
It is used for sealing seams and joints in structures made of various materials (metal, concrete, plastic, rubber, wood, brick).
Main technical characteristics:
| Material Abris Ru-k | Mastic in the form of a homogeneous pasty mass. |
| Operating temperature | From -60 °С to +160 °С |
| Penetration, 0.1 mm | 250-400 |
| Mass fraction of dry matter, %, not less than | 50 |
| Vapor permeability, mg/mh Pa, no more | 0,01 |
| Yield resistance, mm, in thickness 1-2 mm, no more | 2 |
Mode of application:
- Before use, the mastic should be thoroughly mixed, if necessary, diluted with gasoline, white spirit;
- Before applying the mastic on the work surface, it is necessary to prepare it - dry it, clean it from dirt and dust, and in winter, clean it from ice, snow or frost with a brush. From the rusty surface, remove the peeling outer layer of rust and traces of corrosion;
- Mastic Abris Ru-sh is applied with a spatula in 1-2 layers.
Work should be carried out in rubber gloves, away from open sources of fire, in well-ventilated areas or in the open air.
Time of drying of mastic at a temperature of 20 °C not less than 24h. The drying time of the mastic depends on the solvent included in the composition, the ambient temperature.
Consumption of mastic Abris Ru-sh with a layer 1 mm thick is 1 kg per 1 m2.
Industry
Ask your question
All fields marked with an asterisk (*) are required