RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Mastic Abris Rhs-k
Packaging: metal barrels, cans, plastic buckets
TU: 5775-004-52471462-2003
The mastic is chemical resistant and can be applied with a brush.
Application area:
surface preparation before applying chemical-resistant sealant Abris used to protect process and capacitive equipment, building structures from mineral and organic acids, alkalis and other aggressive media.
Characteristics:
Black color.
Product release form: pasty mastic, drying, based on a gasoline solvent (white spirit).
It is used to prepare the surface before applying the Abris chemical-resistant sealant, which is used to protect process and capacitive equipment, building structures from mineral and organic acids, alkalis and other aggressive media.
Main technical characteristics:
| Abris Rhs-k | Mastic in the form of a homogeneous pasty mass |
| Operating temperature | from -60 °С to +80 °С |
| Penetration, 0.1 mm | 350-420 |
| Mass fraction of dry matter, %, not less than | 50 |
| Vapor permeability, mg/mh Pa, no more | 0,01 |
Mode of application:
- Before use, the mastic should be thoroughly mixed, if necessary, diluted with gasoline, white spirit;
- Before applying the mastic, the work surface must be prepared - dried, cleaned of dirt and dust, and in winter, with a brush, cleaned of ice, snow or frost. From the rusty surface, remove the peeling outer layer of rust and traces of corrosion;
- Mastic Abris Rhs-k is applied with a brush in 1-2 layers.
Work should be carried out in rubber gloves, away from open sources of fire, in well-ventilated areas or in the open air.
Time of drying of mastic at a temperature of 20 °C not less than 24h. The drying time of the mastic depends on the solvent included in the composition, the ambient temperature.
The consumption of Abris Rhs-k mastic when applied with a brush in one layer (60-100) µm thick is ≈ 0.4 kg per 1 m2.
Industry
Ask your question
All fields marked with an asterisk (*) are required