• 16.02.2023

Sealing tape Abris A-LB90

Section: Tapes
Packaging: rolls in a corrugated cardboard box
TU: 2513-002-43008408-98

Sealant in the form of self-adhesive tape, which is covered on both sides with anti-adhesive material. Dimensions: 15mmx3mmx10m; 13ммх3ммх10м.

Sealing tape Abris A-LB90

Scope of application: it is intended for sealing and fastening vacuum bags when forming parts made of polymer-composite materials by vacuum infusion and vacuum molding methods in the aerospace industry, the production of structural products.

Characteristics: Gray color. The sealing tape Abris A is used on metal, composite tooling, is compatible with various types of vacuum film.

Main technical characteristics: 

Indicator name The norm
Appearance Plastic homogeneous mass of gray color in the form of a tape
Bond strength with metal during peeling, N/m, not less 500
Maximum temperature 90
Maximum pressure, atm 1,5

Method of application:

The work surface must be cleaned before applying the tape. To remove dirt, the surface is wiped with a solvent-soaked cloth and air-dried for (8 ± 2) minutes. The degreasing zone should exceed the boundaries of the tape application by 10-20 mm on each side.

The tape is placed on a cleaned and degreased surface with anti-adhesive paper outside along the perimeter of the tooling. Then the anti-adhesive paper is removed and a vacuum film is applied and rolled onto the working surface of the tape with the formation of folds to close the vacuum bag. The tape should be glued and rolled so that its surface is smooth, without folds and air bubbles. The entire vacuum forming process will depend on the thoroughness of the installation.

At the end of the process, the tape is removed from the tooling after it has cooled to room temperature, if necessary, a gasoline-grade solvent is used for cleaning.

The warranty period of storage is 12 months from the date of manufacture of the tape.

The tape is stored in its original packaging in dry warehouses at any air temperature, protecting it from exposure to sunlight, precipitation and mechanical damage

Personal protective equipment is not required when using Abris A tape.

 Industry

Shipbuilding, Mechanical engineering.

Ask your question

All fields marked with an asterisk (*) are required

Rambler's Top100 Rambler's Top100 Рейтинг Досок Объявлений Яндекс цитирования