Sealing Materials Plant
Manufacturer of materials and technologies Abris.
Section: Tapes
Packaging: corrugated cardboard boxes
TU: 2513-001-43008408-98
Sealant in the form of a self-adhesive oil-resistant tape, which is covered with anti-adhesive material on both sides.
Scope of application:
the sealant is designed to protect process and storage equipment from machine oils and other oily media.
Specifications:
Color: from white to black*
* it is possible to manufacture sealants of other colors in agreement with the customer (taking into account the production possibilities and the volume of the order).
Product form: rolls.
Main technical characteristics:
Material | Sealant in the form of a self-adhesive oil-resistant tape, which is covered with anti-adhesive material on both sides. |
The main geometric dimensions are: Width (mm) × thickness (mm) |
(2,0÷100,0) × (1,0÷5,0) |
Application temperature | not less -20 °С |
Operating temperature | from -45 °С up to +100 °С (briefly up to +120 ° C) |
Water absorption,%, 24h, maximum | 0,20 |
Strength of bond with metal during peeling, N/m, not less than | 150 |
Yield strength at 80 °C, 24h, mm, no more | 2,0 |
Resistance to the effects of oils by weight change, % | from 0 to 5 |
Storage conditions | Store in the original container in a dry place, avoiding direct sunlight. The shelf life is 24 months. |
Mode of application:
Before applying the sealant, the work surface must be prepared — dried, cleaned of dirt and dust, and in winter from ice. Remove the exfoliated outer layer of rust and traces of corrosion from the rusty surface. It is not recommended to perform sealing work at an outdoor temperature below minus 20 °C, in rain, snow, fog. If necessary, before applying the sealant, the surface must be treated with Abris Rms mastic, or degreased with acetone. When the outside air temperature is below plus 5 °C, work can be carried out only after the sealant has been held for 24 hours at a temperature not lower than plus 15 °C, it is recommended to use thermal equipment during installation.
When installing Abris ms sealant, short-term exposure to temperatures up to plus 120 °C is possible.
It is necessary to remove the anti-adhesive coating from the tape, apply the tape to the work surface, press it tightly or roll it with a roller through the anti-adhesive coating.
When working with a sealant, no special protective equipment is required for workers.
Industry
Ask your question
All fields marked with an asterisk (*) are required