RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Sealing tape Abris E LB
Section: Tapes
Packaging: corrugated cardboard boxes
TU: 2513-001-52471462-2001
Sealant in the form of self-adhesive tape, which is covered with anti-adhesive material on both sides. An electrically conductive sealant is used for welding when sealing seams and joints.
Scope of application:
Abris E LB sealant is used for welding to seal welds in the automotive industry, mechanical engineering.
Specifications:
Color: black
Product form: rolls
Main technical characteristics:
| Material | self-adhesive tape, which is covered with anti-adhesive material on both sides |
| The main geometric dimensions are: Width (mm) × thickness (mm) |
(5,0÷40,0)×(0,8÷2,0) |
| Application temperature | not less than -20 °С |
| Operating temperature | from -60 °С up to +140 °С briefly up to +160 °С |
| Water absorption,%, 24h, no more | 0,20 |
| Strength of bond with metal during peeling, N/m, not less than | 150 |
| Specific volumetric electrical resistance, Ohms x cm no more | 106 |
| Storage conditions | Store in the original packaging in a dry place, avoiding direct sunlight. The shelf life is 24 months. |
Method of application:
Before applying the sealant, the work surface must be prepared — dried, cleaned of dirt and dust. Remove the exfoliated outer layer of rust and traces of corrosion from the rusty surface.
When stored at an outdoor temperature below minus 10 °C, the sealant should be kept for 24 hours at a temperature of (20 ÷ 2) °C before use.
It is necessary to remove the anti-adhesive coating from the tape, apply the tape to the work surface, press it tightly or roll it with a roller through the anti-adhesive coating.
When working with a sealant, no special protective equipment is required for workers.
Industry:
Ask your question
All fields marked with an asterisk (*) are required