• 24.03.2022

Sealing tape Abris S-LT pvh

The sealant is in the form of a self-adhesive tape, which is covered with an anti-adhesive material on the one hand, and reinforced with a PVC film on the other.

Sealing tape Abris S-LT pvh

Scope of application:

  • waterproofing on the foundation;
  • protection of the lower crown of a wooden house;
  • anti-corrosion protection;
  • installation of underfloor heating.

Specifications:

Color: from gray to black*

* it is possible to manufacture sealants of other colors in agreement with the customer (taking into account the production possibilities and the volume of the order).

The tape Abris S-LTpvh is used for waterproofing the foundation, protecting the lower crown of a wooden house, anti-corrosion protection of structures, as well as when installing underfloor heating.

Main technical characteristics:

Material Self-adhesive sealing tape, which is covered with anti-adhesive material on the one hand, and reinforced with PVC film on the other.
The main geometric dimensions are:
Width (mm) × thickness (mm)
 (20÷250) х (1÷2)
Operating temperature from -40°С up to +140°С
Water absorption,%, 24h, maximum 0,30
Strength of bond with metal during peeling, N/m, not less than 400
Strength of bond with concrete at separation, MPa, not less than 0,1
Yield resistance at 70 °С, mm, maximum 2,0
Storage conditions Store in the original packaging in a dry place, avoiding direct sunlight. The shelf life is 24 months.

Method of application:

Before applying the sealant, the working surface must be prepared - dried, cleaned of dirt and dust, and in winter from ice. Remove the exfoliated outer layer of rust and traces of corrosion from the rusty surface. It is necessary to remove the anti-adhesive coating from the tape, apply the tape with the sealing side to the work surface, press it tightly or roll it with a roller through the reinforcing coating. When working with the sealant, no special protective equipment is required for workers.

This material can be purchased in a frost-resistant version-Abris Sm-LTpekom, which is designed for work at negative temperatures (up to -20 °C). The material has increased plasticity and stickiness to cold working surfaces.

Ask your question

All fields marked with an asterisk (*) are required

Rambler's Top100 Rambler's Top100 Рейтинг Досок Объявлений Яндекс цитирования