RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Sealing tape Abris S-T-LTt
Section: Tapes
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99
The sealant is in the form of a self-adhesive tape, which on the one hand is covered with an anti-adhesive material, on the other is reinforced with a heat-shrinkable film.
Scope of application:
Corrosion protection of the external surfaces of underground gas and oil pipelines, urban underground structures, water pipelines, pipelines of gas distribution, pumping and pumping stations, repair of damage sites of polymer coatings of underground pipelines, as well as for the insulation of joints, complex shaped elements and steel tanks in highway and base conditions.
Specifications:
Color: Black.
Product form: roll.
Main technical characteristics:
| Material | Self-adhesive sealing mastic-polymer tape, which is covered with anti-adhesive material on the one hand, and reinforced with a heat-shrinkable film. |
| Operating temperature | from -60 °С tо +80 °С |
| Water absorption,%, 24h, no more than | 0,1 |
| Adhesion to steel at a temperature of 20 °C, N/cm, not less | 20,0 |
| Adhesion to steel after holding in water for 1000 h at a temperature of 20 °C, N/cm, not less | 20,0 |
| Overlap adhesion, at a temperature of 20 °C of tape to tape, N/cm, not less | 7,0 |
| Yield strength at 80 °C, 24 h, mm, no more | 2,0 |
| The brittleness temperature of the mastic layer (flexibility on the rod, diameter-25 mm), °C, no more | -60 |
| Storage conditions | Store in the original packaging in a dry place, avoiding direct sunlight. The shelf life is 24 months. |
Method of application:
The main stages of the work:
- preparation of the outer surface of steel structures and structures for coating. There should be no traces of moisture, soot, oils on the surface. Surface cleaning must comply with degree 4 according to VSN 008-88;
- application of one-component primer Abris R-NK TU 5775-004-52471462-2003, two-component epoxy primer (PE-MP protective primer) TU 20.30.22-001-59859858-2021 or one-component primer NK-50 TU 5775-001-01297.8. The PE-MP primer is a two-component system. Mixing of the components is carried out at a temperature of the components themselves not lower than +5 °C. The components are mixed immediately before application;
- application of insulating tape Abris S-T on the surface of steel structures and structures;
- work on applying the insulating tape is allowed to be carried out at temperatures from minus 60 °С to plus 60 °С. At an ambient temperature below plus 5°C, work can be carried out only after the sealant has been kept for 24 hours at a temperature not lower than plus 15 °C; it is recommended to use thermal equipment and awnings during installation. The tape should be removed from a warm room immediately before application to a steel structure;
- insulated steel structures should be protected from direct exposure to atmospheric factors and UV radiation if they are stored in an open area at a temperature above +20 °C. In these cases, it is necessary to protect the insulated structure using canopies, covering reflective materials that are resistant to atmospheric factors such as light-stabilized films, foam polymer materials, etc.
When working with sealant, no special protective equipment is required for workers.
Industry
Ask your question
All fields marked with an asterisk (*) are required