RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Sealing tape Abris S-LTnp
Section: Tapes
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99
The sealant is in the form of a self-adhesive tape, which is covered with an anti-adhesive material on the one hand, with a non-woven fabric on the other.
Scope of application:
- sealing of the abutments;
- sealing of temperature-deformation joints.
The tape is perfectly painted, plastered, primed.
Specifications:
Color: from gray to dark gray*
* it is possible to manufacture sealants of other colors in agreement with the customer (taking into account the production possibilities and the volume of the order).
Product form: roll.
The sealing tape Abris S-LTnp is used for steam-, water -, gas-tight sealing of the interface of window frames or door frames with building structures. On the side reinforced with non-woven fabric, you can apply plaster, paint, putty.
Main technical characteristics:
| Material | Self-adhesive sealing tape coated on one side with anti-adhesive material and on the other side with reinforcing nonwoven fabric |
| The main geometric dimensions are: Width, (mm) x thickness, (mm) |
(5÷250) х (1÷3) |
| Application temperature | not lower than -20 °С |
| Operating temperature | from -60 °С to +140 °С (in agreement with the customer, the operating temperature range can be increased to +140 °C) |
| Water absorption,%, 24h, maximum | 0,30 |
| Strength of bond with metal during peeling, N/m, not less than | 400 |
| Strength of bond with concrete at separation, MPa, not less than | 0,1 |
| Yield resistance at 70 °С, mm, maximum | 2,0 |
| Storage conditions | Store in the original packaging in a dry place, avoiding direct sunlight. The shelf life is 24 months. |
Method of application:
Before applying the sealant, the working surface must be prepared - dried, cleaned of dirt and dust, and in winter from ice. Remove the exfoliated outer layer of rust and traces of corrosion from the rusty surface. It is necessary to remove the anti-adhesive coating from the tape, apply the tape with the sealing side to the work surface, press it tightly or roll it with a roller through the reinforcing coating. When working with the sealant, no special protective equipment is required for workers.
This material can be purchased in a frost-resistant version- Abtis Sm-LTnp, which is designed for work at negative temperatures (up to -20 °С). The material has increased plasticity and stickiness to cold working surfaces.
Ask your question
All fields marked with an asterisk (*) are required