• 28.02.2022

Abris Ru (polymer-bitumen) is non-hardening liquid drying mastic on the base of white spirit. It is applied with a spatula or brush on a dry and clean surface. It is used as a coating waterproofing. When the solvent evaporates, the penetration is reduced to 30 units.

The greatest harm to construction sites and engineering structures is caused by water and substances dissolved in it. Moisture trapped in the capillary network of brick or concrete begins to migrate through the capillaries. When frozen, moisture turns into ice, which expands and increases pore size. Over time, this leads to the destruction of the surface of bricks, concrete structures, plaster and the penetration of water into the brickwork, foundation. Thus, as a result of fluctuations in air temperature, the surface layer of the building material is destroyed, the appearance and strength of the structure deteriorate.

The operating temperature range of the mastics is from –60 to + 160 °C. Before use, the mastic should be carefully moved, if necessary, diluted with gasoline solvents to the desired consistency. Mastic Abris R, depending on the consistency, is applied with a brush, spatula, pneumatic or airless spraying, pump in 1-2 layers.

 Consumption of Abris Ru mastic with a layer thickness of 1 mm is 1 kg per 1 m², Abris Rs mastic - 1.3 kg per 1 m². Consumption of Abris Rp mastic is 0.2-0.4 kg per 1m².

Materials used:

Mastic Abris Ru-sh

Packaging: metal barrels, cans, plastic buckets
TU: 5775-004-52471462-2003
Bitumen-polymer mastic in the form of a homogeneous paste-like mass, applied with a brush. Black colour.

Mastic Abris Ru-k

Packaging: metal barrels, cans, plastic buckets
TU: 5775-004-52471462-2003
Bitumen-polymer mastic in the form of a homogeneous paste-like mass, applied with a brush. Black colour.