RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Sealing of frame and hangar-type structures
Application of Abris sealing materials for frame and hangar structures.
The use of sealant during assembly is necessary:
- to prevent moisture penetration;
- to improve temperature and humidity indicators;
- to increase the service life of threaded connections and metal-to-metal junction points;
design for extended service life.
Materials used:
Polymer-bitumen mastic Abris Ru-sh in cartridges
Section: tubes (cartridges)
Packaging: cartridge
TU: 5572-003-43008408-99
High-quality single-component polymer-bitumen mastic Abris Ru-sh, is a homogeneous paste-like mass of black color packed in cartridges. It can also be produced in metal sealed buckets. Mastic has a good self-adhesive ability to any dry, cleaned surfaces and high anticorrosive properties. It is characterized by high physical stability in case of temperature changes and other adverse weather factors.
Abris SM-B 260/320 in tubes for a construction gun
Section: Tubes (cartridges)
Packaging: Tube for a construction gun
TU: 5775-004-52471462-2003
Butyl rubber mastic in the form of a homogeneous pasty mass of a drying type based on a gasoline solvent, packed in a 310 ml cartridge (tube for a construction gun). Ready for use.
Sealing tape Abris S-LB
Section: Tapes
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99
The sealant is in the form of a self-adhesive tape, which is covered with an anti-adhesive material on both sides.
Sealant Abris S-Sh
Section: Cords
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99
Sealant in the form of a self-adhesive cord, which is covered with an anti-adhesive material.
Sealant Abris S-B in file-packages
Packaging: file-package
TU: 5772-003-43008408-99
Abris S-B sealant is an uncured mastic-polymer material packed in a file bag for a pneumatic pistol or a hand gun for applying sealants.
Ask your question
All fields marked with an asterisk (*) are required