02.03.2022

Technology of sealing joints and wall units with Abris materials

Areas of use:

walls made of single and three-layer reinforced concrete panels;
walls made of metal three-layer panels;
walls from frame panels.

Technology of sealing joints and wall units with Abris materials

The advantages of the materials:

high gas, steam, water resistance;
operational reliability;
stable adhesion to all building materials;
high manufacturability;
weather resistance;
environmental safety.

Some technical solutions for the use of materials

Walls made of single and three-layer reinforced concrete panels

1. Exterior wall panels
2. Seal "Vilatherm CM"
3. Mastic Abris S-B, Abris Rs, Abris S-Sh cord or Abris S-LTnp tape with a paint layer
4. Solution
5. Heat insulating liner
6. Floor panel

Walls made of metal three-layer panels

1. Panel
2. Diffusion tape Abris S-LTdif or Abris S-LTnp
3. Self-drilling screw SDT
4. Self-drilling SL
7.Complementary element
10. Thermal insulation
13. Cord Abris S-Sh, tape Abris S-LB
14. Galvanized polymer-coated finishing element
16. Steel column
21. Sealing tape Abris S-LTiz

Frame panel walls

4. «Tyvek» film
5. External sheathing made of galvanized steel sheet
6. Insulation
7. Panel frame
8. Corner strip
9. Vapor barrier
10. Tape Abris S-LTnp
11. Rivet
12. Cord Abris S-Sh or tape Abris S-LB

Materials used:

Sealant Abris S-B 80/100

Section: Briquettes
Packaging: polypropylene bags
TU: 5772-003-43008408-99
Mastic-polymer sealant in the form of a briquette of any shape (rectangular, oval, etc.) in an anti-adhesive or polyethylene film.

Abris SM-B 260/320 in tubes for a construction gun

Section: Tubes (cartridges)
Packaging: Tube for a construction gun
TU: 5775-004-52471462-2003

Butyl rubber mastic in the form of a homogeneous pasty mass of a drying type based on a gasoline solvent, packed in a 310 ml cartridge (tube for a construction gun). Ready for use.

Sealing tape Abris S-LTnp

Section: Tapes
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99

The sealant is in the form of a self-adhesive tape, which is covered with an anti-adhesive material on the one hand, with a non-woven fabric on the other.

Sealing tape Abris S-LTiz

Section: Tapes
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99
The sealant is in the form of a self-adhesive tape, which is covered with an anti-adhesive material on the one hand, and reinforced with foamed polyethylene (isolon) of various thicknesses on the other.

Sealing tape Abris S-LTdif

Section: Tapes
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99
A sealant in the form of a self-adhesive tape based on a non-woven fabric with two mounting butyl strips along the edges. On the one hand, the material does not allow moisture to pass through, on the other hand, it helps to filter steam.