• 24.02.2022

Application of Abris K-EI-40 sealant

Abris K-EI-40 sealant is intended for use as part of heat-shrinkable couplings with voltages up to 35 kV to equalize the electric field strength.

Application of Abris K-EI-40 sealant

Material description

Sealant Abris K-EI-40 is an electrical insulating material in the form of tapes or parts coated with an anti-adhesive coating. Possesses high oil resistance and is able to withstand the effect of impregnating compositions of paper insulation of cable glands.

Specifications

Indicator name Value
1 Appearance Plastic homogeneous mass in the form of tapes or parts.
2 Color from gray to black
3 Relative permittivity at a frequency of 50 Hz, not less than 40
4 Oil resistance at 100°C, 24 h,%, no more 1,5
  Non-standardized indicators  
5 Density, g / cm3 1,62
6 Dielectric loss tangent at 50 Hz <1,2

Directions for use

when working with a sealant, the use of special protective equipment for workers is not required; before using Abris K-EI-40 sealant, the working surface must be dried and cleaned of dirt and dust;
 when working with Abris K-EI-40 sealant, it is necessary to remove the anti-adhesive coating and install the tape or part in accordance with the instructions of the cable accessories manufacturer.

Application of Abris K-EI-40 sealant


Materials used:

Sealing tape Abris K-EI

Sealing tape Abris K-EI

Section: Tapes
Packing: corrugated cardboard boxes
TU: 2513-006-52471462-2005
Sealant in the form of a self-adhesive tape, which is coated with an anti-adhesive material.

Sealant Abris K-EI (detail)

Sealant Abris K-EI (detail)

Section: details
Packing: corrugated cardboard boxes
TU: 2513-006-52471462-2005
Sealant in the form of a self-adhesive tape, which is coated with an anti-adhesive material.


Ask your question

All fields marked with an asterisk (*) are required

Rambler's Top100 Rambler's Top100 Рейтинг Досок Объявлений Яндекс цитирования