• 17.02.2022

For sealing and insulation of building structures, industrial premises and technological equipment, ZGM LLC offers protection technology based on anti-corrosion, waterproofing, steam-and gas-tight materials of the Abris HS series.

Insulation of the inner surface of tank containers for the transportation of concentrated hydrochloric acid with the use of sealing materials Abris hs.

Application

For protection of any surfaces (concrete, metal, glass, rubber, plastic, plastic, etc.) working in aggressive environments, including:

• internal and external surfaces of vehicles, tanks, storage facilities, railway, tank trucks, etc. industrial facilities;
• repair (without welding) and sealing of metal containers, hoppers, gondola cars, covered cars, body parts, bodies of motor vehicles, etc. devices for the transportation of bulk products;
• sealing of technological apparatuses, communications and nodes during installation of installations and equipment made of chemical-resistant composite materials;
• protection and repair of electroplating equipment;
• repair and sealing of lines for the removal of aggressive media vapors and industrial sewerage;
• sealing and protection of ventilation lines and their components in any industrial production;
• protection, sealing and repair of structures that have direct contact with fresh and sea water (hydraulic structures, bridges, hulls and structures, port facilities, etc.).

 

An example of the construction of a chemical-resistant coating from a number of protective technologies of the Abris HS series

1. mastic-polymer layer in the composition of the tape Abris LThs;
2. reinforcing coating in the composition of the Abris LThs tape;
3. castle zone;
4. protected surface.

№	Name of indicators	Abris LThs	Abris LBhs
1	Oil resistance at 20°C,%, no more	2	-
2	Petrol resistance at 20°C,%, no more	5	-
3	Water absorption at 20°C,%, no more	0,2	0,2
4	Resistance to aggressive liquid media (hydrochloric, sulfuric, phosphoric, nitric acids, hydroxides, etc.)	0 ÷ (-3) 0 ÷ (+5)	0 ÷ (-3) 0 ÷ (+5)
5	Name of indicators Oil resistance at 20°C,%, no more Petrol resistance at 20°C,%, no more Water absorption at 20°C,%, no more Resistance to aggressive liquid media (hydrochloric, sulfuric, phosphoric, nitric acids, hydroxides, etc.)	150	150
6	Name of indicators Oil resistance at 20°C,%, no more Petrol resistance at 20°C,%, no more Water absorption at 20°C,%, no more Resistance to aggressive liquid media (hydrochloric, sulfuric, phosphoric, nitric acids, hydroxides, etc.)	from - 60°С to +80°С	from - 60°С to +80°С
7	Name of indicators Oil resistance at 20°C,%, no more Petrol resistance at 20°C,%, no more Water absorption at 20°C,%, no more Resistance to aggressive liquid media (hydrochloric, sulfuric, phosphoric, nitric acids, hydroxides, etc.)	2,0	2,0

Application technology

1. Remove visible dirt from the surface to be repaired.

2. If necessary, degrease the work surface.

3. Select the desired part or cut the desired length from the tape.

4. Remove the anti-adhesive coating from the selected material (part and / or tape) and stick the self-adhesive side on the surface to be repaired.

5. Roll the part with a pre-roll roller.

For emergency elimination of leaks, the company has developed the technology "Repair Kit Abris»

 

REPAIR KIT ABRIS

For emergency elimination of leaks, the company has developed the technology " Repair Kit Abris»

Appointment

The Abris chemical repair kit is used for emergency repairs, sealing of railway tankers, tanks, tanks, pipelines, gas tanks, etc.and eliminating leaks of aggressive media (oil, gasoline, diesel fuel, oil, concentrated acids, alkalis, etc. liquids).

Kit contents

• self-adhesive non-curing gas-tight chemical-resistant sealing material (tape and / or part);
• degreasing agents;
• rags;
• brush;
• scissors (knife);
• gloves;
• the feed roller.

Instructions for using the kit

1. Remove visible dirt from the surface to be repaired.

2. If necessary, degrease the work surface.

3. Select the desired part or cut the desired length from the tape.

4. Remove the anti-adhesive coating from the selected material (part and / or tape) and quickly glue the self-adhesive side to the leak site.

5. Roll the part with a pre-roll roller.

Materials used: