RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Abris-DBhs sealing compound
Packaging: corrugated cardboard boxes
TU: 2513-001-43008408-98
A chemically resistant mastic-polymer layer in the form of a part, coated on both sides with an anti-adhesion material.
Scope:
sealing of vehicles.
Characteristics:
Color: black
Product Release Form: part.
Main technical characteristics:
| Material | A chemically resistant mastic-polymer layer in the form of a part, coated on both sides with an anti-adhesion material. |
| The main geometric dimensions are: width (mm) × thickness (mm) |
(5,0÷ 250,0)× (1,0÷5,0) |
| Application temperature | not lower than -20°С |
| Operating temperature | From -60 °С to +140 °С, short time up to +160 °С |
| Water absorption,%, no more | 0,2 |
| Strength of bond with metal during peeling, N/m, not less than | 1000 |
| Yield resistance at 140 °С, 2h, mm, maximum | 2,0 |
| Resistance to liquid aggressive media by weight change,% | 0 to minus 3 0 to plus 5 |
| Storage conditions | Store in the factory package in a dry room, avoiding direct sunlight. The shelf life is 24 months. |
Method of application:
Before using the sealant, the working surface must be prepared - drained, cleaned from dirt and dust, and in winter from ice. Remove the peelable outer rust layer and corrosion traces from the rusty surface. It is not recommended to perform sealing operations at ambient air temperature below minus 20 °С, in case of rain, snow, fog. If necessary, before using Abris hs sealing compound, apply Abris Rhs-k mastic to the surface. At ambient air temperature below plus 5 °С, operations can be carried out only after holding the sealant for 24 hours at temperature not lower than plus 15 °С, it is recommended to use thermal equipment during installation.
When working with Abris-DBhs part, remove the release material and apply the part to the working surface, press or roll it tightly through the release coating.
When working with a sealant, it is not necessary to use special protective equipment for the workers.
Industry
Ask your question
All fields marked with an asterisk (*) are required