RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Galtel Abris
Section: Details
Packing: corrugated carton boxes
TU: 5772-003-43008408-99
Rehangular detail in an anti-adhesive film, made of bitumen-polymer material.
Application area:
provides a tight fit of the rolled material over the entire plane and helps to avoid mechanical damage and ruptures of the roofing carpet made of bitumen-polymer rolled materials at the junction with walls, parapets, ventilation shafts, pipes and chimneys.
Specifications:
Black colour.
Product form: detail
Main sizes: 25*25*1200 mm., 50*50*1200 mm., 70*70*1200 mm.
Main technical characteristics:
|
Material |
Part coated on both sides with anti-adhesive material |
|
Application temperature |
not lower than -20 °C |
|
Operating temperature |
from -60 °С to +70 °С (in agreement with the customer, the temperature range of operation can be increased up to +140 °С) |
|
Water absorption, %, 24 hours, no more |
0,30 |
|
Strength of bond with metal during peeling, N/m, not less than |
400 |
|
Flow resistance at 70 °C, mm, max |
2,0 |
|
Storage conditions |
Store in its original packaging in a dry place, away from direct sunlight. Shelf life is 24 months. |
Mode of application:
- Using a brush, clean the surface from dirt and dust.
- If necessary, dry the work surface to the absence of moisture.
- Apply mastic Abris Ru-k (primer), let dry until “tacky”.
- Heat the fillet with a gas burner (15-20 seconds) or a building hair dryer (25-30 seconds) to a plastic state and apply it to the prepared surface, having previously removed the anti-adhesive coating from the part.
- Roll or press by hand through the release film (use previously removed film) for better adhesion to the work surface.
- Each subsequent element of the fillet is butt-joined with the previous one, tightly pressing one part to the other.
Industry
Ask your question
All fields marked with an asterisk (*) are required