RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Docking road bitumen-polymer tape Abris S
Section: Tapes Packaging:
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99
The bituminous polymer Abris S docking tape is a profiled product based on a bituminous polymer binder and powdered fillers. It is available in the form of rolls of tape packed in corrugated cardboard boxes.
Scope of application:
is designed for sealing seams, interfaces and junctions when installing asphalt concrete coatings on highways, bridge structures and airfields, including when carrying out pit repairs with cast mixtures.
Specifications:
Color: Black.
Product form: roll.
Docking road tapes are used in the following nodes and structures:
- joints of coupling of asphalt concrete coverings;
- abutments to cement-concrete road surfaces, sidewalks, parking lots, warehouse complexes;
- abutments to the curb stone;
- abutments to drainage trays;
- abutments to the foundations of buildings and structures;
- abutments to railway and tram rails;
- abutments to inspection hatches and storm sewer wells;
- joints of foundation blocks;
- joints of well rings;
- joints of protective boxes and drainage trays.
Standard sizes of the material
| Name of the parameter | value |
| Width, mm | 40, 50 |
| Thickness, mm | 5, 8 |
In agreement with the customer, it is allowed to produce tape of other standard sizes.
Main technical characteristics:
| Indicator name | Abris S-LB |
| Appearance | Self-adhesive black tape, coated with anti-adhesive material. |
| Operating temperature, °С | from -50 °C to +140 °C (for a short time up to +200 °C, no more than 2 hours) |
| Softening temperature, °C, not lower | 80 |
| Needle penetration depth at 25 °C, 0.1 mm, no more | 50 |
| Water absorption, % max | 0,3 |
| Flash point, °C | 250-260 |
Advantages
- Flexibility and elasticity;
- High tensile strength;
- Environmental safety;
- Self-adhesive properties.
Instructions for use
Before applying the tape, it is necessary to carry out preparatory work:
- clean the surface from various types of dirt (dust, dirt, snow, ice, etc.);
- dry the surfaces of seams and cracks at low temperatures (up to minus 10 °C), warm the seams with a gas or infrared burner to eliminate ice (frost) and dry;
- prime the surface with a bitumen primer Abris and let it dry.
The use of tapes does not require specialized equipment. It is necessary to remove the tape roll from the factory packaging. Unwrap the roll along the joined surface. Next, apply the tape to the surface to be joined, press it tightly and roll it with a roller, then remove the anti-adhesive material from the tape. If necessary, warm up the tape with a gas burner. The connection of adjacent docking tapes is carried out butt-to-butt. After that, it is necessary to carry out standard operations for laying and compacting asphalt concrete mix.
The tape is transported by all types of transport in covered vehicles. The permissible ambient temperature during belt transportation is from minus 50 °C to plus 40 °C. The tape must be stored in its original packaging, in warehouses at a distance of at least one meter from heating appliances or in places protected from the sun and precipitation at temperatures from minus 50 °C to plus 40 °C.
Industry
Ask your question
All fields marked with an asterisk (*) are required