RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Hot melt glue Abris-LB
Section: Tapes Packaging: corrugated cardboard boxes
TU: 2242-011-52471462-2009
Sealant in the form of self-adhesive tape, which is covered on both sides with anti-adhesive material
Scope of application:
it is used as an adhesive layer of heat-shrinkable and repair products in the cable, electrical industry when sealing the shells and couplings of communication cables of all types, when installing terminal cable devices (junction boxes, boxes, cable boxes, etc.) and insulation of pipelines.
Specifications:
Color: from beige to gray.
Product release form: tape
Main technical characteristics:
| Material | self-adhesive tape, which is covered on both sides with anti-adhesive material |
| Basic geometric dimensions: width (mm)×thickness (mm) |
(2,0÷100)×(1÷5) |
| Softening temperature, °C | 75-100 |
| Application temperature, °С | 80-100 |
| Specific volumetric electrical resistance, Ohms * m, not less | 1·1014 |
| Electrical strength at a frequency of 50 Hz, kV/mm, not less | 40 |
| Bond strength during peeling: - with aluminum, N/m, not less |
1000 |
| Yield strength at 70 °C, mm, no more | 2,0 |
| Elongation at break, %, not less | 300 |
| Water absorption, %, no more | 0,1 |
| Frost resistance (flexibility on the rod), °C | - 40 |
| Storage conditions |
Store in specially equipped places at ambient temperature, avoiding direct sunlight, excluding contamination of the material and equipped with fire fighting equipment. Shelf life - 12 months. |
Method of application:
Before applying the melt glue, the surface of the coupling and cable parts must be cleaned and degreased.
It is necessary to remove the paper (film) from the melt adhesive tape and apply it to the surface of the cable, close the node with a heat-shrinkable tube. Shrinkage HERE is produced by a moderate flame of the burner, which is moved in a circular motion around the tube. The tube should be warmed up especially carefully in the places where Abris melt glue is applied.
Workers must be provided with overalls and safety shoes according to industry standards.
Industry
Ask your question
All fields marked with an asterisk (*) are required