• 13.04.2022

Sealing tape Abris-LThs

Section: Tapes
Packaging: corrugated cardboard boxes
TU: 2513-001-43008408-98
Sealant in the form of a self–adhesive chemically resistant tape, which is covered on the one hand with an anti-adhesive material, on the other hand with a chemically resistant reinforcing material (fluoroplast, polyethylene, etc.)

Sealing tape Abris-LThs

Scope of application:

designed to protect process and storage equipment from mineral and organic acids, alkalis and other aggressive media.

Specifications:

 Color: from white to black*

* it is possible to manufacture sealants of other colors in agreement with the customer (taking into account the production possibilities and the volume of the order).

Product form: rolls.

Main technical characteristics:

Material Sealant in the form of a self–adhesive chemically resistant tape, which is covered on the one hand with an anti-adhesive material, on the other hand with a chemically resistant reinforcing material (fluoroplast, polyethylene, etc.).
The main geometric dimensions are:
Width (mm) × thickness (mm)
(5,0÷250,0) х (1,0÷5,0)
Application temperature not less -20 °С
Operating temperature from -60 °С up to +80 °С
(briefly  to +180 °C)
Water absorption,%, 24h, no more 0,20
Strength of bond with metal during peeling, N/m, not less than 1000
Yield resistance at 80 °С, mm, no more 2,0
Storage conditions Store in the original packaging in a dry place, avoiding direct sunlight. The shelf life is 24 months.

Method of application:

Before applying the sealant, the work surface must be prepared - dried, cleaned of dirt and dust, and in winter from ice. Remove the exfoliated outer layer of rust and traces of corrosion from the rusty surface. If necessary, before applying the sealant, the surface must be treated with Abris Rhs-k mastic. It is not recommended to perform sealing work at an outdoor temperature below minus 20 °C, in rain, snow, fog. At an outdoor temperature below plus 5 °C, work can be carried out only after the sealant has been held for 24 hours at a temperature not lower than plus 15 °C, it is recommended to use thermal equipment during installation.

It is necessary to remove the anti-adhesive coating from the tape, apply the tape to the work surface, press it tightly or roll it with a roller through the anti-adhesive coating. It is used for sealing and gluing two surfaces.

When working with a sealant, no special protective equipment is required for workers.

Industry:

Shipbuilding.

Ask your question

All fields marked with an asterisk (*) are required

Rambler's Top100 Rambler's Top100 Рейтинг Досок Объявлений Яндекс цитирования