• 12.04.2022

Sealing tape Abris-LB

Section: Tapes
Packaging: corrugated cardboard boxes
TU: 5772-003-43008408-99
The sealant is in the form of a self-adhesive tape, which is covered with an anti-adhesive material on both sides.

Sealing tape Abris-LB

 Scope of application:

sealing vehicles (between the body frame and the exterior cladding, joints of floor panels, engine compartment, footrests, roof panels, aluminum exterior corners, window openings, etc.

Specifications:

Color: from white to black*

* it is possible to manufacture sealants of other colors in agreement with the customer (taking into account the production possibilities and the volume of the order).

Product form: rolls.

 Main technical characteristics:

Material Self-adhesive sealing tape, coated on both sides with anti-adhesive material.
The main geometric dimensions are:
Width (mm) × thickness (mm)
(2,0÷250,0)×(1,0÷5,0)
Application temperature not less -20 °С
Operating temperature from -60 °С up to +140 °С
(briefly up to +160 ° C)
Water absorption,%, 24h, maximum 0,20
Strength of bond with metal during peeling, N/m, not less than 150
Resistance to flow at 140 °С, mm, no more 2,0
Storage conditions Store in the original container in a dry place, avoiding direct sunlight. The shelf life is 24 months.

Mode of application:

Before applying the sealant, the work surface must be prepared - dried, cleaned of dirt and dust, and in winter from ice. Remove the exfoliated outer layer of rust and traces of corrosion from the rusty surface. If necessary, before applying Abris  sealant, the surface must be treated with Abris Rp mastic.

It is not recommended to perform sealing work at an outdoor temperature below minus 20 °C, in rain, snow, fog. At an outdoor temperature below plus 5 °C, work can be carried out only after the sealant has been held for 24 hours at a temperature not lower than plus 15 °C, it is recommended to use thermal equipment during installation.

It is necessary to remove the anti-adhesive coating from the tape, apply the tape to the work surface, press it tightly or roll it with a roller through the anti-adhesive coating. It is used for sealing and gluing two surfaces.

When working with a sealant, no special protective equipment is required for workers.

Industry

Shipbuilding.

Ask your question

All fields marked with an asterisk (*) are required

Rambler's Top100 Rambler's Top100 Рейтинг Досок Объявлений Яндекс цитирования