RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Sealing tape Abris Mh-LB
Section: Tapes
Packaging: corrugated cardboard boxes
TU: 5772-010-52471462-2008
Sealant in the form of self-adhesive tape, which is covered on both sides with anti-adhesive material.
Scope of application:
- sealing of flanges and housings of industrial and household refrigerators;
- sealing of equipment used in the food industry in places excluding direct contact;
- sealing the joints of thermal insulation panels from moisture penetration both inside the refrigerator and into the heat insulator;
- sealing of thermal insulation panel assemblies in the places where the slats are used;
- sealing the outlet of the pipes from the evaporator and the refrigerator;
- sealing of seams of external and internal cabinets of refrigerators and freezers (without contact with the air of food storage chambers).
Specifications:
Color: white.
Product form: rolls.
Main technical characteristics:
| Material | Sealant in the form of self-adhesive tape, which is covered on both sides with anti-adhesive material. |
| The main geometric dimensions are: width (mm) × thickness (mm) |
(2,0÷250,0)×(1,0÷5,0) |
| Application temperature | not less than -20 °С |
| Operating temperature | from -60 °С to +140 °С |
| Water absorption,%, 24h, no more than | 0,30 |
| Strength of bond with metal during peeling, N/m, not less than | 150 |
| Yield strength at 70 °C, 24 h, mm, no more | 2,0 |
| Storage conditions | Store in the original packaging in a dry place, avoiding direct sunlight. The shelf life is 24 months. |
Method of application:
Before applying the sealant, the work surface must be prepared - dried, cleaned of dirt, dust. Remove the exfoliated outer layer of rust and traces of corrosion from the rusty surface.
It is necessary to remove the paper from one side of the tape Abris Mh-LB and press it to the working surface of the product through a layer of anti-adhesive coating. At the same time, a tight, gap-free fit of the sealant to the surface should be ensured, and then remove the anti-adhesive paper from the other side of the tape and attach the working surface of the second product.
Sealing works are recommended to be carried out at an outdoor temperature of at least -10 °C. Sealing work at an air temperature below minus 10 °C (but not below minus 20 °C) can be carried out only after the sealant has been kept at a temperature of plus (25-30)° within 24 hours.
When working with a sealant, no special protective equipment is required for workers.
Industry
Ask your question
All fields marked with an asterisk (*) are required