RuSealing Materials Plant
Manufacturer of materials and technologies Abris.
Sealing tape Abris Mh-LT
Section: Tapes
Packaging: corrugated cardboard boxes
TU: 5772-010-52471462-2008
Sealant in the form of a self-adhesive tape, which is covered on one side with an anti-adhesive material, on the other side with a reinforcing one.
Scope of application:
- sealing of flanges and housings of industrial and household refrigerators;
- sealing the joints of thermal insulation panels from moisture penetration both inside the refrigerator and into the heat insulator;
- sealing of thermal insulation panel assemblies in the places where the slats are used;
- sealing the outlet of the pipes from the evaporator and the refrigerator;
- sealing of seams of external and internal cabinets of refrigerators and freezers (without contact with the air of food storage chambers).
Specifications:
Color: white.
Product form: rolls.
Main technical characteristics:
| Material | sealant in the form of a self-adhesive tape, which is covered on one side with an anti-adhesive material, on the other side with a reinforcing one. |
| The main geometric dimensions are: width (mm) × thickness (mm) |
(2,0÷250,0)×(1,0÷5,0) |
| Application temperature | not less than -20 °С |
| Operating temperature | from -60 °С to +140 °С |
| Water absorption,%, 24h, no more than | 0,30 |
| Strength of bond with metal during peeling, N/m, not less than | 150 |
| Yield strength at 70 °C, 24 h, mm, no more | 2,0 |
| Storage conditions | Store in the original packaging in a dry place, avoiding direct sunlight. The shelf life is 24 months. |
Method of application:
Before applying the sealant, the work surface must be prepared — dried, cleaned of dirt, dust. Remove the exfoliated outer layer of rust and traces of corrosion from the rusty surface.
It is necessary to remove the anti-adhesive paper from Abris Mh-LT tape and press it to the working surface of the product through a layer of anti-adhesive coating. At the same time, a tight, gap-free fit of the sealant to the surface should be ensured.
Sealing works are recommended to be carried out at an outdoor temperature of at least -10 ° C. Sealing work at an air temperature below minus 10 °C (but not below minus 20 °C) can be carried out only after the sealant has been kept at a temperature of plus (25-30) °With within 24 hours.
When working with a sealant, no special protective equipment is required for workers.
Industry
Ask your question
All fields marked with an asterisk (*) are required